Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Sun Valley
If your fireplace is pushing smoke back into the room or you’ve spotted a cracked flue liner from the roof, you’re in the right place. We handle chimney repair in Sun Valley as full-system work: we scope the flue, find what’s actually failing, and fix it with professional-grade materials rather than handing you a list of problems and a contractor referral. Our technicians have up to 9 years of experience with the masonry fireplaces and clay liners that fill this part of the east San Fernando Valley. Call (844) 968-2733. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Sun Valley Homeowners Call Chimney Sweep Tujunga for Chimney Repair
Sun Valley is a hot, dry pocket of the Valley where fireplaces sit idle for months and then get worked hard when the nights turn cold. That pattern is rough on a chimney, and it’s the kind of wear we know how to read. When we inspect a flue in this part of town, we already know what we’re likely to find: glaze-stage creosote baked onto the walls, original clay liners that have spalled with age, and caps missing or rusted through after years of wind and dust.
What sets our work apart is that inspection and repair live together. When we find a problem, we can act on it in the same visit or lay out a clear follow-up scope, so you’re not stuck searching for a mason after the sweep leaves. We work with an industry-vetted roster of professional-grade brands, including HeatShield, DuraFlex, Gelco, and Olympia Chimney, and we choose materials for durability rather than the lowest cost. We’re also set up to handle cap and crown work alongside repair, since those are the two spots where water gets in and starts the damage in the first place. Our local reputation in Sun Valley rests on doing the diagnostic work honestly and showing you what we see. If the chimney can safely wait, we’ll tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Sun Valley
These are the repairs that come up most often on Sun Valley’s older stucco bungalows and ranch homes, along with the light-industrial and workshop buildings mixed through the neighborhood.
Chimney Relining
Many Sun Valley homes still have their original 1950s clay-tile liners, and those tiles crack and spall with age. A stiff brush can shatter a compromised liner if the flue isn’t scoped first, which is why we look before we sweep. When the clay is too far gone to trust, we reline with a HeatShield or DuraFlex system sized to the appliance. A liner that fits the flue properly is what makes the draft work, and it’s what keeps heat and combustion gases where they belong.
Mortar Repointing
Decades of heating and cooling work the mortar joints in a firebox and smoke chamber until they crumble. Repointing restores those joints with fresh mortar matched to the original, which tightens the firebox and helps the chimney draw the way it should. We see this constantly in the post-war homes around Sun Valley, where the brick is sound but the joints between it aren’t.
Chimney Waterproofing
The rare winter rains here do real damage to aging masonry, especially after a long dry season has opened up cracks and pores. Waterproofing seals the brick against absorption while still letting the masonry breathe, so moisture doesn’t get trapped and freeze the surface apart. It’s one of the simplest ways to slow the decay we see on so many Sun Valley chimneys.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the first thing to fail when it’s been installed poorly or simply aged out. A failed flashing joint lets water run straight down into the attic and the chimney structure. We repair and replace flashing so the roof-to-chimney connection sheds water the way it’s supposed to. If your damper is rusted and your mortar is eroding, flashing is often where the story starts.
Trusted Brands We Service in Sun Valley
We source and install components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, all recognized names in the professional chimney and hearth trades. That matters when you’re choosing a liner or a cap, because the difference between a manufacturer-quality part and a hardware-store cover shows up a few winters down the road. We don’t claim to stock parts locally, but we can get the right components for your flue and keep the job moving without unnecessary delay. A fitted Gelco or Famco cap, for instance, is sized to your flue rather than stretched over it.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Sun Valley Homes
- Third-degree creosote glaze. Sun Valley’s long dry season and stop-and-start burning bake creosote onto flue walls until it hardens into a glassy glaze a standard brush can’t touch. It takes specialized removal, and it’s the leading reason we recommend inspection before the burn season starts.
- Cracked 1950s clay liners. The original clay tiles in these homes have been heating and cooling for decades, and many have spalled or cracked. Without scoping the flue first, a stiff brush can finish the job and send tile fragments down the chimney.
- Crown and flashing failures. When the rare winter rains arrive, water finds every crack in a failing crown or flashing joint. That water rusts dampers, erodes mortar, and starts the cycle of decay that leads to bigger repairs.
- Debris-packed uncapped flues. On the dry, windy Sepulveda Basin side of town, palm fronds, leaf litter, and fine dust pack into open flues. A proper cap is the difference between a clear flue and one that’s been acting as a debris trap all summer.
Pricing for Chimney Repair in Sun Valley, CA
Repair costs here track the age of the housing stock and how far the damage has gone. A typical mortar repointing job in Sun Valley runs roughly $350 to $900, depending on how much of the firebox and smoke chamber needs work. Chimney waterproofing usually lands around $250 to $600 for a standard single-flue chimney. Flashing repair tends to run $200 to $500. Relining is the larger investment, generally $1,800 to $4,500 depending on flue length and the liner system chosen. The written estimate sets the final price, and it’s free. We don’t recommend anything we can’t show you on camera, and we’ll say plainly when a repair can safely wait.
We Also Serve Cities Near Sun Valley
We work throughout the east Valley and the surrounding foothill communities, including North Hollywood, Sunland, Valley Village, and Burbank. If your chimney sits on the edge of Sun Valley or just over the line in a neighboring town, our chimney repair service reaches you the same way. Same standards, same materials, same camera evidence.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Sun Valley
Wood stoves here should be inspected and swept at least once a year, and often more frequently when a stove is the primary heat source. The stop-and-start burn pattern in this climate lets creosote build up and bake hard between seasons, so an annual inspection before the burning season is the baseline. If your stove sees heavy use, plan on an interim check. Call (844) 968-2733 to book an inspection.
Cracked tiles, spalling flakes, and visible gaps in the clay are signs the liner needs repair, not just a sweep. A compromised liner can’t safely contain heat and gases, and a stiff brush can shatter it if the flue isn’t scoped first. We scope the flue on camera so you can see the condition for yourself before deciding. Call (844) 968-2733 for an exact quote; estimates are free.
A smoky smell with no fire burning usually points to a draft problem, a buildup of creosote, or moisture getting into the masonry. A failing crown or flashing lets water in, and damp creosote gives off that sour, smoky odor. The fix starts with a proper inspection to find the source rather than masking it. Call (844) 968-2733 to schedule one.
Yes. In the dry, windy Sepulveda Basin corridor, uncapped flues fill with palm fronds, leaf litter, and fine dust over a season, and a fitted cap is what stops that. A manufacturer-quality Gelco or Famco cap is sized to your flue, not a generic cover stretched over it. It also keeps birds and rain out. Call (844) 968-2733 for a cap quote.
Third-degree creosote is the hard, glazed stage of creosote buildup that a standard brush can’t remove. This climate’s long dry season and infrequent, smoldering burns bake creosote into that glaze faster than in neighboring foothill towns, so it’s a common find here. It needs specialized removal, not a routine sweep. Call (844) 968-2733 to have your flue checked.
Whether your flue needs a new liner, a crown repair, or just an honest look before the burn season, we’d like to help. Call (844) 968-2733 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.