Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Sunland
Chimney inspection in Sunland usually runs $150 – $275 for a Level 1 and $250 – $450 for a Level 2 with camera, and the technician can generally tell you within the visit whether your flue is sound or masking a problem. If your house sits along the canyon edge or in one of the mid-century ranches off Mt. Gleason, the inspection is doing more work than it would in a newer subdivision: it’s checking caps, mortar joints, and whether the flue was ever lined at all. We built this page for Sunland homeowners who want to know what’s actually inside the stack before anyone quotes a repair. Call (844) 968-2733 and we’ll book the inspection.

Why Sunland Homeowners Call Chimney Sweep Tujunga for Chimney Inspection
We’re a full-system chimney company, which means the person who inspects your flue is the same one who can cap it, resurface it, or repair the crown. That matters in a place like Sunland, where a single inspection often turns up three separate problems: a missing cap, a spalling tile joint, and a crown that’s cracked from settling. We don’t hand those off to a second contractor. You get one scope, one quote, and one crew that already knows what’s in your stack.
The other thing we hear from homeowners here is frustration with inspectors who flag everything as urgent. So we work the opposite way. Nothing gets recommended to you unless you can see it on the camera footage yourself. If a repair can safely wait until spring, we say so. If the flue is fine, we tell you that too and move on.
We work across Sunland regularly, from the older cabins on the canyon side to the tract ranches closer to the valley floor, and we’ve learned to read the difference fast. Our technicians have up to 9 years of experience, and inspections are always paired with a written photo report so you keep a record of what was found.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Sunland
Level 1 Inspection
A Level 1 is the routine check for a chimney that’s in regular use and hasn’t changed. We look at the firebox, damper, flue interior from the top and bottom, cap, and crown, then note anything that needs watching. In Sunland’s older ranch homes, a Level 1 often catches a cracked crown early, before water has a chance to work into the masonry.
Level 2 Inspection
The Level 2 is the most common inspection we run in Sunland, and it’s the one you need after any change in the system: a new appliance, a chimney fire, a storm that took off part of the cap, or a home sale. It includes everything in a Level 1 plus a full video scan of the flue and a check of accessible portions of the attic and crawl space.
Level 3 Inspection
A Level 3 is the deep inspection, and it means opening up parts of the chimney structure to reach a section that can’t be seen any other way. It’s reserved for real evidence of a problem: a failing liner behind masonry, a hidden flue serving an old appliance, or damage the camera shows but can’t fully identify. We explain exactly what gets opened before anything starts.
Camera Inspection
Camera inspection is where we do our best work in Sunland’s older homes. Clay-tile liners from the 1940s and ’50s develop spalling mortar joints that a visual check from the firebox will miss entirely, and unlined flues can hide gaps behind the tile. The camera shows what’s actually there. You see it on the monitor as we go, and it goes into your report.
Trusted Brands We Service in Sunland
When an inspection turns up something that needs parts, we work with a vetted roster of professional-grade manufacturers: DuraFlex for stainless liners, HeatShield for resurfacing and liner repair, and Gelco and Olympia Chimney for caps and related components. We don’t stockpile parts, so turnaround means ordering the correct component for your flue and returning to install it, usually without a long wait. The reason we stay with these names is simple: they’re built to last in a real chimney, not a hardware-store shelf. We install what fits and what holds up.
Common Chimney Inspection Problems We See in Sunland Homes
Hillside pockets off Mt. Gleason and Apperson have a particular quirk: many of the original flues on 1940s and ’50s cabins were built without a cap at all. An inspection there often starts with clearing soot and debris from the stack and ends with fabricating a custom cap on site. On the valley floor, the problems are different.

- Missing or damaged caps on canyon cabins. Without a cap, soot, leaves, and bird nests pack the flue over the idle months and choke the draft. A quick sweep clears the debris but won’t fix what caused it.
- Clay-tile flues with spalling mortar joints. These gaps don’t show on a visual check from the firebox. Camera inspection catches them, and catching them early is what keeps creosote from seeping behind the liner and into the masonry.
- Cracked crowns and failed flashing on mid-century ranches. Seismic settling opens hairline cracks in the crown that let water in, and the resulting spalling can look like a simple cleaning problem until you look closely.
- Undersized or unlined flues serving newer appliances. Some Sunland homes have a stove or insert vented into a stack that was never sized for it. The inspection is where that shows up, before it becomes a draft or carbon monoxide problem.
The Santa Ana season matters too. Dry, gusty winds funnel through the Big Tujunga Canyon mouth from roughly October into January, and Red Flag warnings make spark arrestor integrity a genuine fire-safety question rather than a comfort one. Meanwhile, the mild winters mean fireplaces sit idle for months, and creosote hardens while nests get built. An inspection in fall catches both.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Sunland, CA
A Level 1 inspection in Sunland typically runs $150 – $275. A Level 2 with full camera scan usually lands between $250 and $450, depending on flue length and how much access the roof and attic allow. A Level 3, which involves opening structure, starts around $600 and climbs with the scope of what has to be opened. Camera inspection as a standalone add-on to a sweep is commonly $100 – $200. These are estimates for the Sunland market, and the written estimate you get before booking is the final price.
What moves the number: roof pitch and access, the number of flues, and how much of the system is visible without opening anything. If the inspection finds a repair, that’s quoted separately and only after you’ve seen the footage. It’s your call whether to do it now or wait. Call (844) 968-2733 for a free estimate.
| Inspection type | Typical Sunland range |
|---|---|
| Level 1 | $150 – $275 |
| Level 2 (with camera) | $250 – $450 |
| Level 3 (opening structure) | From $600 |
| Standalone camera / flue inspection | $100 – $200 |
We Also Serve Cities Near Sunland
We cover Sunland and the surrounding foothill communities, including Tujunga, Sun Valley, La Crescenta-Montrose, and Burbank. If your home is near any of these, our chimney inspection team can usually reach you without much travel. Call (844) 968-2733 to book, and we’ll confirm the appointment window when you call.
Serving Sunland, CA – Our Local Coverage Area
We serve Sunland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Sunland
Yes, especially in Sunland. An idle flue is where problems hide: cracks widen, mortar spalls, and nests get built over months of disuse. An inspection tells you whether the stack is still sound before you light the first fire of the season. Call (844) 968-2733 to book yours.
A Level 1 is a visual check of accessible parts of the chimney; a Level 2 adds a video scan of the flue and checks accessible attic and crawl space; a Level 3 opens structure to reach an area that can’t be seen otherwise. Most Sunland homes with older flues benefit from a Level 2. Call (844) 968-2733 if you’re not sure which one you need.
Look up from the yard. If you can see the open flue from the ground, the cap is missing or loose. In Sunland’s canyon cabins, a missing cap often means debris and nests are already inside, so the inspection should include clearing the stack. Call (844) 968-2733 for an exact quote on the visit.
Third-degree creosote is the hardened, glazed layer that fuses to the flue wall, and a standard sweep won’t remove it. It needs hand-scraping or a chemical treatment, which is why we plan for it during the inspection rather than promising a quick pass. Call (844) 968-2733 for an exact quote.
A Level 2 inspection is what most buyers and their agents ask for during a sale, and it’s the standard you’ll see requested in a real estate inspection. It gives both sides a documented look at the flue, cap, and crown. Call (844) 968-2733 to schedule before closing.
Book Your Chimney Inspection in Sunland
If your house is one of Sunland’s older cabins or a mid-century ranch, the odds are good that some part of the chimney system has never been inspected up close. We’ll show you the camera footage, hand you a written report, and tell you plainly what can wait and what shouldn’t. Call (844) 968-2733 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.