Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Burbank
If your Burbank chimney is shedding mortar crumbs, smoking into the room, or sitting on a 1940s brick stack that never had a liner, we can help. We handle the full system here: inspection, sweeping, crown and cap work, and the structural repairs below, so a problem found during a sweep gets addressed rather than handed to a second contractor. Our technicians have up to 9 years of experience, and we know the Burbank housing stock that shapes this work, from the hillside blocks of 91504 to the post-war tracts of 91506. Call (844) 968-2733 to book an inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Burbank Homeowners Call Chimney Sweep Tujunga for Chimney Repair
Burbank chimneys are their own category of repair. The city’s pre-war and mid-century bungalows were built around open-hearth fireplaces meant for wood, and many of those hearths now sit idle or have been converted to gas. Use turns sporadic. When a fire does get lit, it tends to burn hot between long gaps, and that pattern leaves creosote to bake onto flue tiles for years between cleanings. Fireplaces off for a stretch, used hard through a cold snap or a Santa Ana wind evening, then off again. That is a recipe for glazed creosote, not an occasional dusting of soot, and it changes what a repair visit involves.
Burbank also carries a heavier concentration of original 1920s-1940s chimneys with unlined or clay-tile flues than you’ll find in neighboring Glendale or Pasadena. Those stacks are especially vulnerable to the rapid buildup that comes from infrequent, hot-burning fires. We built our repair service around exactly that problem.
One call covers diagnostics and repair. When the camera inspection turns up deteriorated joints, a spalling firebox, or a crown that’s letting rain in, we write a clear scope and either act on it during the visit or schedule the follow-up. Nothing gets referred out. Our roster of professional-grade materials includes HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield, chosen for durability rather than lowest cost, and we can work with your insurer where coverage applies. Customer trust in Burbank comes from showing our work, not from selling it. We put the camera footage in front of you and let you see what we see.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Burbank
The repairs below cover the failures we run into most in Burbank’s older masonry, though the order of work always follows the inspection findings, not a script.
Mortar Repointing in Burbank
Mortar is the sacrificial layer of a brick chimney, and it gives out long before the brick does. On Burbank’s older stacks, winter rain soaking into weathered joints softens the mortar until it crumbles and the bricks above start to move. Repointing means grinding out the failed mortar to a proper depth and packing new mortar in to match the original, which restores the bond without replacing sound brick.
Spalling Brick Repair in Burbank
Spalling shows up as brick faces flaking off or popping loose, usually on the side of the chimney that takes the most weather. Once water gets behind the face, it traps there and pushes the brick apart from within. We replace the damaged units and address the moisture path that caused them, because patching the brick alone treats the symptom. Clay-tile flues and firebox brick in Burbank’s Spanish Colonial homes are common places to find this.
Chimney Waterproofing in Burbank
Burbank’s hot summers and mild, wet winters are a slow drain on masonry. Waterproofing means applying a breathable sealer that keeps liquid water out while letting the masonry dry from the inside, and it works best once the crown, flashing, and mortar joints are already sound. Sealing over a cracked crown just traps the problem underneath. We waterproof as the last step of a repair, not instead of one.
Flashing Repair in Burbank
Flashing is the metal seal where the chimney meets the roof, and it’s the most overlooked source of water damage in older Burbank homes. Failed flashing lets rain run straight down the chimney’s exterior and into the attic, staining ceilings and rotting the roof deck around the stack. We rebuild the flashing and counter-flashing properly, then check the crown above it so the whole water path is sealed.
Trusted Brands We Service in Burbank
We’re authorized to source and install components from DuraFlex, HeatShield, and Gelco, and we work with Olympia Chimney, Famco, and Copperfield as well. That matters on a Burbank repair because the right liner or cap is chosen for the stack in front of us, not pulled off a shelf. A Fit-matched Gelco or Famco cap seals a Burbank chimney against the debris the fall Santa Ana winds drive against it, and HeatShield resurfacing lets us repair a damaged flue from the inside instead of tearing out masonry. We don’t stock parts locally, so turnaround depends on the specific component, and we’ll tell you the timeline in the written estimate before any work is booked. Please ask about availability when you call.

Common Chimney Repair Problems We See in Burbank Homes
- Unlined 1940s brick stacks in 91504. Many original hillside chimneys here were built with no flue liner at all, just brick. Decades of intermittent hot fires glaze the creosote into a hard shell that a standard brush pass won’t touch, so what looks like a routine cleaning turns into a rotary cleaning and a real assessment of whether the flue needs a liner.
- Cracked crowns and failed flashing. Winter rain finds every gap in older masonry. A cracked crown or failed flashing lets water soak mortar joints and spall the firebox brick, and the damage builds quietly for years before it shows.
- Degraded clay-tile flue joints. Infrequent, hot-burning fires crack the joints between clay tiles, and undersized or damaged dampers make it worse. The result is poor draft and smoke spilling into the room even when the damper is fully open.
- Prefab metal fireplaces in 91506. The flatter, newer tracts lean on prefab metal fireplaces, which need different cleaning tools and their own liner and cap inspection. They don’t fail the same way masonry does, and treating them like masonry causes problems.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Burbank, CA
Pricing is set per job by the written estimate, and the estimate is free. The ranges below are typical for Burbank’s market and are meant as a starting frame, not a quote.
| Repair | Typical Burbank range |
|---|---|
| Mortar repointing (partial) | $450 – $1,200 |
| Tuckpointing (crown and mortar detail) | $350 – $900 |
| Spalling brick repair | $500 – $1,500 |
| Chimney waterproofing | $300 – $700 |
| Flashing repair or rebuild | $400 – $1,100 |
| Chimney rebuild (upper section) | $3,000 – $8,000 |
What moves a job within these ranges is the amount of masonry involved, how high the work sits, and whether the flue itself needs work once the camera goes in. A single repointed joint and a full upper rebuild are not the same repair, and we price them separately so you can see the difference. Call (844) 968-2733 for a free estimate on your Burbank chimney. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate always sets the final price.
We Also Serve Cities Near Burbank
Our chimney repair work covers Burbank along with the surrounding communities, including Toluca Lake, Glendale, North Hollywood, and Sun Valley. If you’re just outside the city line, call and we’ll confirm coverage. If you’re searching for full-system chimney service across the region, start with our chimney repair page, or read more about how we serve Burbank.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Burbank
Not automatically. An unlined brick flue is common in Burbank’s pre-war and mid-century homes, and whether it needs a liner depends on the condition of the brick and the flue itself, which we check with a camera before recommending anything. In many cases a HeatShield resurfacing or a properly sized DuraFlex liner is the right fix, but only where the footage shows it’s warranted. We’ll show you what we see and explain the options before you decide. Call (844) 968-2733 for an inspection.
Smoke spilling into the room usually points to poor draft, and in older Burbank chimneys that often means degraded clay-tile flue joints, an undersized or damaged damper, or a flue that’s undersized for the appliance vented into it. A straightforward cleaning helps in some cases; in others the flue or damper needs repair. A camera inspection separates the two. Call (844) 968-2733 to schedule one.
Demand camera evidence before agreeing to any liner or masonry repair, and read it as a homeowner, not a technician. This is the specific defense against the upselling that targets unlined 1940s flues in 91504 and aging clay-tile stacks across Burbank, because the footage shows whether a flue is actually glazed, cracked, or sound. We include the camera inspection and a photo report with the work, and we’ll say plainly when a repair can safely wait. Call (844) 968-2733 with questions.
Yes, and an idle fireplace in Burbank is often the one that needs it most. Fireplaces used sporadically let creosote harden and become more flammable over time, and water intrusion through a cracked crown or failed flashing keeps eroding mortar whether or not you light a fire. An inspection checks the flue, crown, flashing, and firebox together. Call (844) 968-2733 to book one.
Repointing is grinding out failed mortar to a proper depth and packing in new mortar to restore the joint; tuckpointing is a finer finish that fills and shapes the joint for a cleaner, more uniform appearance. Both address deteriorated mortar, and the right one depends on the condition of the joints and how visible the area is. We’ll tell you which your chimney needs after we inspect it. Call (844) 968-2733 for a free estimate.
Contact Us
If your Burbank chimney has loose mortar, a cracked crown, failed flashing, or a flue that needs a real look before the next burning season, call (844) 968-2733 for a free estimate. We inspect with a camera, show you the findings, and repair only what the footage supports. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.