Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Tujunga Homeowners
The cap on top of your chimney is the first line of defense against rain, birds, squirrels, and the fine debris that Tujunga’s canyon winds push across the foothills. When the cap rusts through or a cracked crown lets water seep into the masonry, you don’t just get a leak; you get a slow breakdown that can spread into the flue and the firebox. Our technicians have up to 9 years of experience working with the brands that hold up in this climate, and we carry professional-grade materials from DuraFlex, Gelco, Olympia Chimney, and others. We answer 24/7 at (844) 968-2733 and can often schedule a cap or crown repair the same day you call.
What Our Chimney Cap & Crown Service Includes
Cap and crown work covers the top of the chimney system, and the small details here determine whether the rest of the flue stays dry through the rainy season. We handle the fabrication, the repair, and the coating as one scope so you don’t have to coordinate separate trades.
Cap Installation
A chimney cap is the metal or mesh cover that sits on top of the flue to keep water, animals, and airborne debris out. If your chimney has no cap, or only a rusted mesh screen, installing a proper one is the cheapest way to prevent water intrusion and wildlife entry. We fabricate and fit caps using Gelco and Olympia Chimney components, sized to your flue dimensions and matched to the crown.

Cap Replacement
Caps deteriorate from UV exposure, rain, and the heat that rises off the flue. A cap with loose fasteners, a bent lid, or a torn screen no longer keeps animals out and may rattle in the wind. We source direct-fit replacements from Gelco and Famco so the new cap seats correctly on the existing crown rather than wobbling on mismatched hardware.

Crown Repair
The crown is the concrete or masonry slab at the top of the chimney that sheds water away from the flue. Hairline cracks widen with each wet season, and once water gets behind the crown it can work down into the mortar joints and the flue itself. We cut out failing sections and rebuild the crown with a proper slope so water runs off instead of pooling.

Crown Coating
A crown coating is a flexible, weather-resistant membrane applied over sound masonry to seal minor cracks and block moisture before it gets in. It’s appropriate when the crown is intact but starting to show surface checking or has been patched before. We use HeatShield crown coating materials because they flex with the masonry instead of cracking at the first temperature swing.
Multi-Flue Cap
A multi-flue cap covers the full chimney top, sheltering several flues under one lid instead of capping each individually. If your Tujunga home has a fireplace and a furnace flue side by side, a single over-cap is often simpler and better looking than two small caps. We measure the full crown and fabricate the cap to fit with proper clearance for draft.
Custom Cap
Some chimneys have an irregular crown, an oversized flue, or a shape that stock caps won’t fit. A custom cap is built to the actual dimensions of your chimney so it sits level and seals properly. We take the measurements on site and have the cap fabricated in the metal and finish that suits the house.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and each brings something different to cap and crown work. Gelco and Famco caps are built to fit specific flue and crown dimensions, and we know where those caps tend to wear first, usually at the fasteners and the screen seams. Olympia Chimney components are what we reach for when the crown and flue need to work together as a system, and their caps hold their shape under the summer heat that builds on Tujunga rooftops.
HeatShield is the name we turn to for crown coating and masonry resurfacing where the crown needs a flexible seal rather than a full rebuild. DuraFlex comes into play when a cap or crown repair uncovers a flue liner problem underneath, and we can address it in the same scope. Whether you have a Gelco cap that’s seen better days, a HeatShield-coated crown that needs refreshing, or a cap from any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
Most cap and crown problems show up as small symptoms before they become structural. Here’s what we see most often on Tujunga chimneys.
- Water stains on the ceiling or chimney breast. A cracked crown or a missing cap lets rain straight into the flue, and the stain usually appears well before the damage is visible from the roof. If you see a brown ring spreading on the ceiling near the chimney, get it looked at before the next storm.
- Rust streaks on the cap or firebox. A rusted cap has lost its protective coating and is starting to fail at the fasteners. Rust in the firebox often means water is running down the flue from above.
- Birds, squirrels, or debris in the firebox. An open flue or a torn cap screen lets animals nest inside, and nesting material is a fire hazard. A proper cap with an intact screen stops this immediately.
- Visible cracks or crumbling mortar on the crown. Cracks wider than a hairline, or masonry that crumbles when you touch it, mean the crown is no longer shedding water. Left alone, the damage works down into the flue and the surrounding structure.
- The cap is loose or tilted. A cap that shifts in the wind or sits off-center no longer seals, and it can blow off entirely in a strong gust. Loose caps are a quick fix now and a bigger repair later.
Our Chimney Cap & Crown Process – Step by Step
- 1
Visual inspection from the roof and the firebox. We look at the cap, crown, flue, and firebox together because cap problems often point to issues below. We take photos of anything we find so you can see exactly what we see.
- 2
Camera inspection when the crown or flue looks compromised. If the crown is cracked or the flue shows signs of water damage, we run a camera down the flue to check the liner before recommending any repair. Nothing gets quoted without evidence you can review.
- 3
Written estimate with a clear scope. You get a flat-price estimate that lists the cap or crown work, the materials, and any related repair we found. The estimate sets the final price, and we don’t start until you approve it.
- 4
Repair or installation. We remove the old cap or failing crown sections, prep the surface, and install the new component using Gelco, Olympia Chimney, or HeatShield materials as the job calls for. The work is done in one visit whenever the scope allows.
- 5
Final check and photo report. We confirm the cap is seated, the crown sheds water, and the flue is clear, then send you the photos so you have a record. If anything else needs attention down the line, you’ll know before it becomes urgent.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Tujunga?
Cap and crown work in Tujunga typically runs from a few hundred dollars for a standard single-flue cap up to well over a thousand for a full crown rebuild on a large or irregular chimney. The ranges below are typical estimates for the most common scenarios; the written estimate you receive on site sets the final price.
- Standard cap installation: typically $180 – $420 depending on flue size and whether the crown needs minor prep.
- Cap replacement: typically $200 – $450, including removal of the old cap and refitting.
- Crown coating: typically $300 – $600 for a sound crown that needs sealing rather than rebuilding.
- Crown repair or rebuild: typically $600 – $1,500 depending on the size of the crown and how much masonry has to be cut out.
- Multi-flue or custom cap: typically $450 – $1,200, driven by the footprint and the metal or finish you choose.
Several things move the price: the size and shape of the crown, whether the flue liner is sound or shows damage underneath, how accessible the roof is, and the material you select. You avoid overpaying by getting a written scope before work begins and by knowing that a cap or crown estimate should always include a look at the flue, not just the top slab. Our estimates are free and include a camera inspection and photo report when the crown looks compromised.
Chimney Cap & Crown Near Tujunga – Our Service Area
We serve Tujunga and the surrounding foothill communities, including Sunland, La Crescenta-Montrose, Burbank, Sun Valley, Glendale, La Cañada Flintridge, North Hollywood, Toluca Lake, and Valley Village. Response times depend on the day and the job, but we schedule promptly and keep you informed. For neighboring work, see our chimney cap & crown page for Sunland and our chimney cap & crown page for La Crescenta-Montrose.
Serving Tujunga, CA – Our Local Coverage Area
We serve Tujunga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Tujunga
A chimney cap is the metal and mesh cover that sits on top of the flue to keep out rain, animals, and debris. The crown is the concrete or masonry slab at the top of the chimney that sheds water away from the flue. Together they protect the entire chimney system from water intrusion, and both are covered under our chimney cap & crown service.
Most cap installations and replacements take one to two hours, and crown coatings are usually done in a single visit. A full crown rebuild can take longer depending on the size and how much masonry has to be removed. We’ll give you a time estimate with the written quote so you can plan around it.
Typical estimates range from about $180 for a standard cap installation up to $1,500 for a full crown rebuild, with most jobs landing somewhere in between. The exact price depends on the crown size, the material, and whether the flue needs attention underneath. Call (844) 968-2733 for an exact quote; estimates are free.
Yes, we install and replace Gelco and Olympia Chimney caps and source direct-fit components for both. We also work with Famco and Copperfield caps, and with HeatShield materials for crown coating and resurfacing. If your cap is from a brand we haven’t named, we can still help.
Same-day scheduling is often possible when you call early. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; a call outside dispatch hours is booked into the next opening. We’re closed on Saturday.
Yes, our workmanship is backed by a satisfaction guarantee. If something isn’t right after the job, call us and we’ll make it right. The specific terms come with your written estimate so you know exactly what’s covered before we start.
Clear access to the fireplace and the attic hatch if we’ll be inspecting from inside, and move anything fragile away from the hearth. You don’t need to do anything to the roof; we handle the access and the safety setup. If you have prior inspection reports or photos, have them handy so we can compare findings.
Schedule Your Chimney Cap & Crown Service in Tujunga Today
A cap or crown that’s failing lets water into the system every time it rains, and the repair only gets bigger the longer it waits. Call (844) 968-2733 to book a free estimate. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and inspect the full system so you know exactly what’s needed before any work begins. You can also start with a chimney inspection, a chimney sweep, or our chimney repair and fireplace repair services. For the parent service overview, visit Chimney Sweep Tujunga.
Written by the team at Chimney Sweep Tujunga.