Chimney Cap & Crown in Valley Village, CA | Chimney Sweep Tujunga

Chimney Cap & Crown in Valley Village - Measured and Fitted, One Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Cap & Crown Across Valley Village

If your chimney cap is missing, rusted through, or barely hanging on, and the crown above it looks cracked, you’re in the right place. Chimney cap and crown work in Valley Village usually runs $600-$2,400 depending on whether the crown needs coating or a full rebuild and whether the cap is a single-flue model or a custom multi-flue cover. We handle both, and we know this housing stock well: the ranch and mid-century homes on these lot-and-block streets have original masonry chimneys that take a beating from the sun and sit idle most of the year. Call (844) 968-2733 and we’ll set up a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Technician measuring a chimney flue for a professional chimney cap installation in Valley Village, CA

Call (844) 968-2733

Why Valley Village Homeowners Call Chimney Sweep Tujunga for Chimney Cap & Crown

We’re a full-system chimney company, which matters because cap and crown problems rarely show up alone. Most calls start with one visible issue and turn into a conversation about the flue liner, the smoke chamber, and the firebox once we’re on the roof. We’re authorized to source and install components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so the cap on your chimney is a fitted, manufacturer-grade piece rather than a hardware-store cover that gets strapped on and blows loose in the first Santa Ana wind event.

What we find in Valley Village specifically is that the crown is usually the real problem, not the cap. Intense summer sun bakes the masonry, the rainy season pushes moisture into the hairline cracks it leaves behind, and the cycle repeats until water is getting into the smoke chamber. Our technicians have up to 9 years of experience reading that kind of damage and telling you honestly which parts need work now and which can wait. We work with an industry-vetted roster of brands for that reason: durability first, cost second.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Chimney Cap & Crown Services in Valley Village

A crown that’s failing and a cap that’s missing are two halves of the same water problem. Here’s how we handle each piece, and why we treat them together.

Crown Repair in Valley Village

The chimney crown is the concrete or mortar cap at the very top of the stack, and it’s the part that takes the most sun in Valley Village. When it cracks, water runs straight down through the masonry and into the smoke chamber. Repair means removing the failed material, re-forming the crown with a proper slope so it sheds water, and bonding it to the flue. On original 1950s and 60s masonry fireplaces, we often find the crown has never been touched.

Crown Coating

Not every crown needs to come off. When the damage is surface-level cracking rather than a structural break, a crown coating seals the masonry and buys you years before a rebuild is necessary. We use HeatShield products for this kind of resurfacing work, which is a capability most single-service sweep companies don’t have. If a coating will hold, we’ll tell you. If it won’t, we’ll show you the photos.

Cap Installation in Valley Village

A proper chimney cap keeps rain out of the flue, keeps birds and squirrels from nesting on the smoke shelf, and sparks from landing on the roof. On a Valley Village ranch home with an original brick fireplace, a single-flue Gelco cap sized to the flue opening is usually the right fit. We fit the cap to the actual flue, not to a generic measurement, because a loose cap is worse than no cap in a wind event.

Multi-Flue Caps and Custom Caps

Larger two-story rebuilds and duplexes along the main corridors in Valley Village often have more than one flue running up the same stack. A multi-flue cap covers the whole chimney top in one unit, which keeps weather and animals out of every flue at once. Custom caps are for the odd chimney that doesn’t match a standard size. Both are worth pricing out before you commit to a single-flue solution on a multi-flue chimney.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 968-2733

Trusted Brands We Service in Valley Village

We source and install cap and crown materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters more than it sounds. A chimney cap is a specific product with a specific flange, mesh rating, and mounting method, and the right one depends on your flue size, your chimney’s shape, and whether animals or weather are the bigger threat. We don’t claim to keep parts on a truck or stock a warehouse in Valley Village. What we do is specify the correct manufacturer part for your chimney and get it fitted, so the first call is also the last one.

Technician installing a new custom metal chimney cap and crown. in Valley Village, CA

Common Chimney Cap & Crown Problems We See in Valley Village Homes

  • Cracked crowns from sun and rain cycling. Intense summer heat on old mortar followed by rainy-season damp is the single most reliable way to crack a masonry crown in Valley Village. Water then runs into the smoke chamber and starts eating the joints from the inside.
  • Dormant flues turned into nesting habitat. Because these fireplaces see little steady fire use, the flue stays dry and open for months. That’s prime real estate for birds and squirrels, and a nest jammed on the smoke shelf will block your draft completely.
  • Missing or rusted caps on original 1950s-60s masonry fireplaces. Many of these chimneys have gone decades without a sweep and without a cap. A Level 1 or Level 2 inspection often turns up spalling brick and a deteriorated crown sitting under a cap that rusted out years ago.
  • Decades of deferred inspection. When a fireplace goes years between fires, nobody looks at the chimney. Small crown cracks become big ones, and by the time the fireplace is used again, the water damage is already done.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (844) 968-2733

Pricing for Chimney Cap & Crown in Valley Village, CA

Most cap and crown jobs in Valley Village fall into a range you can plan around. A standard single-flue cap installation typically runs $250-$450. A multi-flue or custom cap runs $500-$950, since the unit has to cover the whole stack and often needs custom sizing. Crown coating, when the damage is surface-level, usually runs $400-$750. A full crown rebuild, where the old crown is removed and re-formed with a proper slope, typically runs $900-$2,400 depending on the chimney size and access. These are estimates for this market, and the written estimate you get after the inspection sets the final price. We don’t add a trip charge or a diagnostic fee, and nothing gets recommended without photos or camera footage you can look at yourself. If the work can safely wait a season, we’ll say so.

Service Typical Estimated Range in Valley Village
Single-flue cap installation $250-$450
Multi-flue or custom cap $500-$950
Crown coating $400-$750
Full crown rebuild $900-$2,400

If you want a straight answer on what your chimney actually needs, call (844) 968-2733. Estimates are free, and we’ll show you what we found.

We Also Serve Cities Near Valley Village

We work across the surrounding area as well, so if you’re just outside Valley Village we can still help. Our chimney cap & crown team covers Valley Village, North Hollywood, Toluca Lake, Sun Valley, and Burbank. The housing stock in those neighborhoods is similar enough that the same crown-and-cap diagnosis usually applies, though each block has its own quirks. Call and we’ll confirm coverage for your address.

Serving Valley Village, CA – Our Local Coverage Area

We serve Valley Village and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Chimney Cap & Crown in Valley Village

What Happens When You Call

A call gets you booked for a visit, not a sales pitch. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. On the visit, a technician inspects the crown, the cap, the flue, and the smoke chamber, then gives you a written estimate with photos so you can see exactly what needs work and what doesn’t. Because we handle inspection, sweeping, cap and crown work, and chimney and fireplace repair under one roof, you won’t need a second contractor when a problem turns up. Call (844) 968-2733 for a free estimate.

Written by the team at Chimney Sweep Tujunga.

Why Valley Village Chooses Chimney Sweep Tujunga

We set the standard for chimney cap & crown in Valley Village.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Valley Village

Getting your chimney cap & crown project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Valley Village Customers Say

Trusted by homeowners across Valley Village and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Priya Mehta
★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Michelle Vaughn
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Carmen Reyes

Ready for Chimney Cap & Crown in Valley Village?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Valley Village.

(844) 968-2733

Request a Free Estimate in Valley Village

Tell us about your chimney cap & crown needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - We Answer 24/7