Chimney Inspection in Burbank, CA | Chimney Sweep Tujunga

Chimney Inspection in Burbank - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Inspection Across Burbank

If you own a home in Burbank, your chimney is probably older than your roof, your windows, and most of the wiring in the walls. That’s normal here. Burbank has a deep inventory of 1920s – 1950s Spanish Colonial and California bungalow homes, and the fireplaces in them were built for a different era of burning. A chimney inspection is how you find out what’s actually going on inside the flue before a small problem becomes a structural one. We run camera inspections, flue inspections, and all three levels of inspection across Burbank, and we can get to most of the city quickly. Call (844) 968-2733 and we’ll set up a time. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Professional chimney sweep cleaning a fireplace with an industrial vacuum. in Burbank, CA

Call (844) 968-2733

Why Burbank Homeowners Call Chimney Sweep Tujunga for Chimney Inspection

We’re a full-system chimney company, not a sweep crew that hands off the moment a camera finds something. That matters more in Burbank than in most of the San Fernando Valley. Inspections, cleaning, cap and crown work, liner resurfacing, and fireplace repair all live under one roof, so findings turn into a scope of work rather than a phone number for a different contractor. Our technicians have up to 9 years of experience, and they handle the technical end: draft, liner, and crown, not a quick visual pass from the driveway.

The other reason people in Burbank call us is that we won’t quote a reline you can’t see the reason for. If a recommendation comes out of an inspection, it comes out of camera footage you watch on the screen. Nothing gets recommended on a hunch. That’s the standard we hold ourselves to, and it’s why a lot of the calls we get in Burbank come from neighbors who were told they needed thousands of dollars of work and wanted a second read on it.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Chimney Inspection Services in Burbank

Inspection is the entry point for everything else. We don’t lead with the sweep, because a sweep without an inspection is guesswork about scope. Here’s what each level covers in a Burbank chimney.

Level 1 Inspection

A Level 1 is a visual inspection of the readily accessible parts of the system: the firebox, damper, smoke chamber, flue from the firebox up to where it’s visible, and the exterior at the roofline. It’s the right call for a Burbank home in good standing that’s burned the same fuel in the same appliance for years and shows no signs of trouble. It is not enough for a 1940s hillside house with a brick flue that’s never been looked at with a camera.

Level 2 Inspection

A Level 2 goes further, and it’s the inspection most older Burbank homes actually need. It includes the Level 1 walkthrough plus a full-length camera run of the flue, inspection of accessible portions of the chimney interior, and a look at the crown, flashing, and joints. It’s what you want after a property changes hands, after a chimney fire, when an appliance is swapped or added, or when a 91504 hillside brick stack is being evaluated for the first time in decades. Our chimney inspection team treats the Level 2 as the baseline for anything built before about 1960.

Level 3 Inspection

A Level 3 is diagnostic, and it’s targeted. It’s called for when the camera or the Level 2 raises a specific question that can’t be answered without opening up a portion of the chimney, such as a suspected hidden crack in the flue tile behind masonry, or a deteriorated joint in a location the camera can see but can’t fully assess. We scope it to the question, not the whole chimney. No Burbank homeowner should be sold a Level 3 without a stated reason tied to an earlier finding.

Camera Inspection and Flue Inspection

The camera is the whole point. We run it the full length of the flue, we show you the footage on-screen as we go, and we stop where it matters: cracked tiles, spalled mortar joints, gaps at tile seams, offset flues, and creosote glazed onto the walls. In Burbank’s older homes, the camera run is usually what separates a routine clean from a lined-flue problem that’s been sitting quietly for a decade. A flue inspection without footage is a visual opinion. With footage, it’s a record you can look at later and point to.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 968-2733

Trusted Brands We Service in Burbank

When an inspection turns up work that needs doing, the materials matter. We source and install components from DuraFlex, HeatShield, Olympia Chimney, Gelco, and Famco, and each is a professional-grade name in the chimney and hearth trades. HeatShield matters here in a specific way: it’s a liner resurfacing system that addresses deteriorating clay-tile flues without tearing out the whole chimney, and it’s a capability most single-service sweeps simply don’t have. Gelco and Famco cap supply means fitted, manufacturer-quality caps rather than a hardware-store cover that fits loosely and lets water in at the seam. We don’t stock parts on a truck, so turnaround on a specific component depends on the piece and is confirmed in the written scope. You’ll know what’s being installed and why before anything is ordered.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (844) 968-2733

Common Chimney Inspection Problems We See in Burbank Homes

The pattern in Burbank is specific: chimneys built for regular wood burning that now sit mostly idle, with the occasional fire during a Santa Ana wind event or a cold snap. That pattern creates its own set of problems.

Professional chimney sweep performing a thorough fireplace inspection in Burbank, CA
  • Glazed creosote on unlined 1940s brick flues. In the hillside blocks of 91504, a lot of original brick chimneys were built with no flue liner at all, just brick. Years of intermittent hot fires bake the creosote into a hard, glazed shell that a standard brush pass won’t touch. It takes rotary cleaning, and the camera is what proves the shell is actually gone.
  • Spalling mortar joints in original clay-tile flues. The clay-tile flues in 1920s – 1940s Burbank homes are more than eighty years old in some cases, and the mortar between the tiles deteriorates. That lets combustion gases and moisture into the surrounding brickwork, and it’s usually caught only when a Level 2 camera run goes the full length of the flue.
  • Undersized or seized dampers on open-hearth fireplaces. Old open-hearth fireplaces in Burbank often have dampers that no longer close fully or never opened wide enough for the firebox. The result is draft problems, smoke spillage into the room, and heat loss up the flue when the fireplace isn’t in use.
  • Gas appliances vented into stacks built for wood. A number of Burbank homes have a gas insert or a furnace flue tied into a chimney that was designed for a wood fire. The stack may be oversized for the appliance, or unlined when the appliance requires a liner, and the camera record is what settles whether that flue is sized and sound enough for the appliance at all.

Here’s how a typical inspection goes in an older Burbank bungalow or Spanish Colonial. The technician starts at the firebox and smoke chamber, works up through the damper, and runs the camera the full length of the flue. What usually shows up: a clay-tile or unlined brick flue with spalling mortar joints, an undersized or seized damper, and glazed second- or third-degree creosote baked onto the tile from years of sporadic hot fires. We show you the footage on-screen and walk the crown and flashing with you. Then we explain what the evidence supports, whether that’s rotary cleaning, a HeatShield or DuraFlex liner, or damper work, and what it doesn’t. If a gas appliance has been vented into a wood-designed stack, the camera record is what settles the sizing question.

Pricing for Chimney Inspection in Burbank, CA

Chimney inspection pricing in Burbank tracks the level of inspection and the age of the chimney, and the older the flue, the more there is to look at. A typical Level 1 inspection in Burbank runs $125 – $225. A typical Level 2 with a full camera run runs $225 – $425, and the upper end reflects the reality of a long, offset flue in an original brick stack. A Level 3 that involves opening a portion of the chimney runs $450 – $900 depending on the scope, and we don’t quote it without a stated reason tied to a Level 2 finding. Camera inspections and flue inspections bundled with a sweep typically come in within the Level 2 range.

Every inspection includes a written report and photo record, and the estimate for any recommended work is free and set in writing. Nothing on that estimate gets recommended without camera evidence you can see. If a repair can safely wait, we’ll tell you that, and we’ll tell you what to watch for in the meantime. Call (844) 968-2733 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 968-2733

We Also Serve Cities Near Burbank

We work across the surrounding area as well, including Toluca Lake, Glendale, North Hollywood, and Sun Valley. The housing stock in these neighboring cities overlaps with Burbank’s, so the inspection approach often carries straight over, but we still read each chimney on its own evidence. If you’re just outside the Burbank city line, call and we’ll confirm coverage and scheduling.

Serving Burbank, CA – Our Local Coverage Area

We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Chimney Inspection in Burbank

Why Burbank Chooses Chimney Sweep Tujunga

We set the standard for chimney inspection in Burbank.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burbank

Getting your chimney inspection project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney inspection project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Burbank Customers Say

Trusted by homeowners across Burbank and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Priya Mehta
★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Michelle Vaughn
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Carmen Reyes

Ready for Chimney Inspection in Burbank?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Burbank.

(844) 968-2733

Request a Free Estimate in Burbank

Tell us about your chimney inspection needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - We Answer 24/7