Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Sunland
If you burn wood to stay warm through the Santa Ana season, the cap and crown on your chimney are what stand between your flue and the wind-driven debris that fills it. We handle both for homeowners across Sunland, from canyon-edge cabins off Mt. Gleason and Apperson to the mid-century ranches on the valley floor. Caps get packed with soot and nests, crowns crack and spall, and most of that work happens in the hillside pockets where original 1940s-’50s flues often never had a cap to begin with. Our technicians have up to 9 years of experience and know this terrain. Call (844) 968-2733 to book a look.

Why Sunland Homeowners Call Chimney Sweep Tujunga for Chimney Cap & Crown
Sunland sits at the mouth of Big Tujunga Canyon, where dry winds funnel through the foothills each fall. That geography shapes what we find on caps, crowns and flues here in ways valley-floor work rarely sees. Our team reads those conditions before recommending a cap or a crown repair, so the fix matches the wind load and the age of the system rather than a generic part. We work with professional-grade brands like HeatShield, Gelco, Olympia Chimney and Famco, and our chimney cap & crown team handles the diagnosis and the repair in one visit.
What we don’t do is hand you a list of problems and send you hunting for a second contractor. Inspection findings get acted on the same visit or in a clear follow-up scope. Sunland customers tell us that’s the difference they notice: a sweep visit that ends with a fabricated cap and a repaired crown instead of a phone number. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, so a call about a canyon cabin gets a real answer and a real booking. Fast dispatch to the foothills, same week in most cases.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Sunland
Custom Cap Fabrication
In Sunland’s canyon-edge cabins, the original flues frequently have no cap at all, so Santa Ana wind-driven debris and birds move straight into the stack. That’s why a standard sweep here often starts with fabricating a cap on site rather than fitting a stock cover. We measure the flue, cut and form the cap to fit, and set it so it keeps out weather and wildlife without choking the draft. Gelco and Famco caps are what we source for fitted installations.
Crown Repair
The mortar crown at the top of the chimney is where water gets in before it spalls the masonry below. On older ranch homes on the valley floor, seismic settling cracks the crown over time. We cut out the damaged mortar, rebuild the crown with proper slope so it sheds water rather than pooling it, and check the flashing while we’re up there. A cracked crown on a Sunland chimney rarely stays a small problem once the fall rains arrive.
Crown Coating
Not every crown needs a rebuild. When the mortar is sound but the surface has worn, a coating seals the top and slows further cracking. We inspect first and tell you plainly when a coating will hold and when a rebuild is the honest call. Coating a crown that’s already failing just hides the water path for a season.
Multi-Flue Cap
Some Sunland chimneys carry two flues, one for the fireplace and one for a wood stove or insert, and they need a single cap sized to cover both stacks. We measure the flue spacing, match the cap to both openings, and set it so each flue still draws correctly. A mismatched multi-flue cap can disturb the draft on one appliance while it fixes the rain on the other.
Trusted Brands We Service in Sunland
We source and install components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. Those are recognized names in the chimney and hearth trades, chosen for how they hold up, not for what they cost us. Gelco and Famco caps come fitted to the flue we measure. HeatShield is what we reach for when a flue needs resurfacing before a cap goes back on. We don’t stock parts locally, so the cap or crown material gets ordered to the job, which keeps turnaround tight without pretending we have a warehouse on the shelf.
Common Chimney Cap & Crown Problems We See in Sunland Homes
Sunland’s housing stock runs from 1920s-’50s cabin-style and ranch homes along the canyon edges to 1950s-’70s tract ranches on the valley floor. The problems look different depending on which side of that line you live on.

- Cracked mortar crowns from seismic settling. Older ranch homes on the valley floor develop hairline cracks that let water into the masonry. Once that water freezes and thaws, the brick face spalls and the crack widens.
- Caps packed with soot and debris. In canyon cabins, the previous fire season’s soot loads the cap while birds build nests in the same opening. Blocked draft plus creosote is a fire hazard, not a nuisance.
- Unlined, narrow flues with heavy creosote. The 1920s-’50s cabins often have no liner at all, and third-degree creosote glazes the flue wall where a brush won’t touch it. That calls for chemical treatment or relining, not another pass with a rotary brush.
- Missing caps on original flues. Many of these flues were built without a cap, so every Santa Ana season drives debris and birds straight in. A fabricated cap is the fix, and it’s rarely needed on the tract ranches.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Sunland, CA
Pricing here is per job, set by a written estimate after we’ve looked at the flue and the crown, so the numbers below are typical ranges for Sunland’s market rather than a fixed quote. A standard single-flue cap installation typically runs $180 to $450. Custom-fabricated caps for canyon cabins with no existing cap run $350 to $700 depending on the flue size and access. Crown repair, which includes cutting out failed mortar and rebuilding the slope, usually lands between $400 and $1,200. Crown coating on sound mortar runs $250 to $550. A multi-flue cap sized for two stacks runs $450 to $900. Wind load, roof pitch and how much masonry work the crown needs all move the figure. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Sunland
Canyon conditions don’t stop at the city line, so the same cap and crown work carries into Tujunga, Sun Valley, La Crescenta-Montrose and Burbank. Homes along the foothills in those towns run into the same wind-driven debris and cracked crowns that Sunland’s canyon-edge cabins do. If you’re on the valley side of the ridge, the tract ranches get the same seismic settling treatment on their mortar crowns.
Serving Sunland, CA – Our Local Coverage Area
We serve Sunland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Sunland
Once a year, even if you burn lightly. In Sunland’s mild winters a fireplace can sit idle for months, which lets creosote harden on the flue wall and gives birds time to build nests in an open cap. The dry Santa Ana season from roughly October through January adds wind-driven debris on top of that. A yearly look catches a packed cap or a cracked crown before it turns into masonry work. Call (844) 968-2733 to book an inspection.
Yes, a cap can go on an unlined flue, but the flue still needs to be dealt with first. A cap keeps out debris and birds, yet it doesn’t fix a narrow, unlined stack that’s glazed with third-degree creosote a brush can’t remove. We inspect, hand-scrape what we can, and tell you plainly whether chemical treatment or relining comes before the cap. Call (844) 968-2733 for a free estimate so the cap goes on a flue that’s ready for it.
Visible cracks wide enough to catch a fingernail, crumbling mortar at the edges, or water staining down the chimney face point to a rebuild rather than a coating. A coating seals a sound surface; it won’t hold a crown that’s already failing. On Sunland’s older ranch homes, seismic settling is the usual culprit. Call (844) 968-2733 and we’ll tell you which one your crown actually needs.
Yes, as long as the cap is sized and set to match both flue openings and their spacing. In Sunland, that often means a fireplace flue paired with one serving a wood stove or insert. A cap that doesn’t match the spacing can disturb draft on one appliance. We measure both stacks before ordering. Call (844) 968-2733 for a free estimate.
The roughly October through January Santa Ana season drives debris and soot straight into caps and stresses crowns with wind load. Red Flag warnings make a sound spark arrestor and a clear cap a real fire-safety matter, not just comfort. Checking the cap and crown before the winds start is the practical move. Call (844) 968-2733 to get on the schedule before the season turns.
Book Your Chimney Cap & Crown Work in Sunland
A packed cap, a cracked crown or an open flue on a canyon cabin is a job worth getting right before the next burn. We connect you with a vetted local professional who inspects, shows you the findings, and does the repair in one scope. The local pro is licensed and insured as their state requires, the estimate is free, and the written price is what you pay. Call (844) 968-2733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.