Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Tujunga?
Chimney repair in Tujunga typically runs $275 to $850 for most jobs, with common fixes like a new cap or a crown patch landing near $300 to $550. Full relining with a stainless liner runs $1,800 to $4,200, and HeatShield resurfacing of a damaged flue sits around $1,200 to $2,600. These are estimates for the Tujunga market in 2026; your written estimate sets the final price.
What we see across the Foothill Boulevard corridor and the canyons above it is that repair costs here are driven less by labor rates than by what the inspection turns up. A house near Sunland Park with a 1950s masonry chimney and no cap has a different bill than a newer build off Commerce Avenue with a factory-built fireplace insert. The price follows the diagnosis.
We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 9 years of experience working on the full chimney system, from sweeping to HeatShield resurfacing to cap and crown replacement.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type. Every range below assumes a single-story or standard two-story home in the Tujunga area.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement (Gelco or Famco) | $185 – $425 | Fitted stainless or galvanized cap, removal of old unit |
| Crown repair (patching) | $275 – $525 | Sealing cracks, re-sloping the crown, masonry patch |
| Crown rebuild | $650 – $1,400 | Full crown removal and re-pour with proper overhang |
| Flue tile replacement (single section) | $450 – $900 | Removal of cracked tile, new tile set in mortar |
| HeatShield flue resurfacing | $1,200 – $2,600 | Ceramic resurfacing of a damaged but structurally sound flue |
| Stainless liner install (DuraFlex) | $1,800 – $4,200 | Full-length liner, insulation, top plate and cap |
| Firebox repair (brick or mortar) | $400 – $1,200 | Re-pointing, firebrick replacement, refractory mortar |
| Damper replacement | $250 – $600 | Top-sealing or throat damper, hardware, seal |
| Masonry tuckpointing (per course/foot) | $25 – $60/linear ft | Grinding out failed mortar, repacking joints |
| Smoke chamber parging | $350 – $800 | Re-parging the smoke shelf and chamber |
| Chimney chase cover (metal) | $400 – $900 | Custom-fabricated cover for prefab systems |
| Full inspection with camera | $150 – $375 | Level 1 or Level 2 inspection, photo report |
What pushes a Tujunga job toward the top of a range is almost always one of three things: the chimney sits on a slope and needs staging, the flue is clay tile that’s cracked in multiple sections (so the liner run is longer), or there’s water damage to the crown that’s already moved into the surrounding masonry. The other driver is material choice. A DuraFlex liner, HeatShield resurfacing, and a Gelco cap all cost more than generic equivalents, and they’re the right call when you’re paying for the repair once instead of twice.
What pulls the price down: a single repair caught early, a cap that just needs refastening rather than replacement, or a crown that can be patched instead of rebuilt. That’s the whole argument for catching problems before the first burn of the season.
What Affects Chimney Repair Pricing in Tujunga
Most of what moves the number on a Tujunga chimney job is not visible from the ground. Here’s what actually changes the bill.
- Access and roofline. Many Tujunga homes sit on graded lots, and a chimney on the downhill side of a steep-pitch roof takes longer to stage, set ladders, and work from safely. That labor time shows up in the estimate.
- Chimney construction type. A masonry chimney (brick and clay tile) allows tuckpointing, crown repair, and HeatShield resurfacing. A factory-built metal chimney allows almost none of that and instead needs component replacement, which changes the whole pricing structure.
- Flue liner condition. A single cracked tile can be swapped. Multiple cracked tiles with gaps and misalignment call for a full liner, and in some cases a HeatShield application over a structurally intact but eroded flue. The difference between a $900 tile job and a $2,600 resurfacing job is what the camera sees.
- Water intrusion history. Tujunga’s dry summers followed by wet winters are hard on uncapped chimneys. When the crown has been leaking for a couple of seasons, the damage spreads into the brick and mortar below it. Repairing a crown at first sign is a fraction of rebuilding it later.
- Chimney height and offset. Taller stacks and chimneys with offsets require more liner material and more time. A straight 15-foot run and a 30-foot stack with a bend are different jobs.
- Parts and material grade. Generic hardware-store caps, uninsulated liners, and low-grade refractory mortar fail faster here. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield for exactly that reason: the material holds up, and the repair lasts.
One more factor: the wildfire-risk and smoke-damage reality of the foothills. Homes here get more wood-burning hours than coastal LA because of elevation and cooler evenings. That means more creosote accumulation, more stress on flue tiles, and more demand for a properly functioning draft system. If your flue hasn’t been inspected in more than a year, the inspection is what tells you whether your repair cost is a patch job or a liner.
How to Save on Chimney Repair
A few practical things we’d tell any Tujunga homeowner:
- Cap the chimney before winter. A Gelco or Famco cap runs $185 to $425. Rebuilding a crown and re-pointing the top two courses of masonry after a couple of wet seasons runs $900 or more. The cap is the cheaper insurance.
- Catch the crown early. A hairline crack at the crown edge that gets sealed now costs $275. A crown that’s been leaking for three seasons and hollowed out the mortar under it costs $1,400 to rebuild.
- Bundle the inspection with the repair visit. The inspection findings are what drive the repair scope, so if a repair is already scheduled, have the camera run during the same visit. This avoids paying twice for the diagnostic.
- Repair the flue, don’t reline the whole stack. If the only issue is one or two damaged sections and the rest is sound, HeatShield resurfacing often bridges the gap. When it can, it saves $600 to $1,200 over a full liner install.
- Get the estimate in writing and ask what’s included. A complete estimate lists materials by name (a DuraFlex liner, a HeatShield application, a Gelco cap) and tells you what’s not covered. That makes it easy to compare apples to apples.
- Ask about the scope, not just the price. An estimate that says “chimney repair, $400” is a placeholder. A real estimate specifies which components are being addressed.
One call covers diagnostics and repair. If the inspection turns up something, we address it same visit or lay out a clear follow-up scope. You won’t be handed off to a second contractor.
Call (844) 968-2733 for a free estimate. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm.
Is It Cheaper to Repair or Replace a Chimney in Tujunga?
Repair is almost always cheaper than replacement. A chimney rebuilt from the roofline up runs $6,000 to $15,000 or more in this market, while most repair scopes land between $275 and $850. Replacement only makes sense when the chimney is structurally unsound (leaning, mortar gone throughout the stack, or a factory-built unit that’s beyond its service life). For the vast majority of what we see, the fix is targeted: a new crown, a HeatShield resurfacing, a DuraFlex liner, or a cap and damper.
If you’re deciding between fixing and replacing, the inspection tells you which way to go. Call (844) 968-2733 for a free estimate.
How Much Does Chimney Leak Repair Cost in Tujunga?
Chimney leak repair in Tujunga usually costs $275 to $900, depending on where the water is getting in. A crown crack sealed with flexible sealant runs at the low end. A new cap, a re-sloped crown, and new mortar at the flashing run toward the high end. If the leak has reached the flue and softened the tile, add a liner or resurfacing to the total.
Where the leak starts matters more than the size of the stain. Water at the ceiling often comes from a failed crown or a missing cap, not from the roof flashing. The inspection locates it. Call (844) 968-2733 for a free estimate.
Do I Need a Chimney Liner Replaced, or Can It Be Resurfaced?
It depends on the condition of the existing flue. If the clay tile is intact but the inner face is eroded or has gaps at the joints, HeatShield resurfacing can restore it at $1,200 to $2,600. If tiles are cracked through, misaligned, or missing, the flue needs a full liner – a DuraFlex stainless system runs $1,800 to $4,200 installed.
Resurfacing is the less expensive route when the flue qualifies. It’s also a specialty. Not every sweep is trained to apply it, and that’s part of why we offer it as a standalone service.
Have the flue scoped with a camera before deciding. Call (844) 968-2733 for a free estimate.
Can You Come the Same Day for a Chimney Repair?
Yes, same-day service is available for most repairs when you call early. We dispatch Sunday through Friday, 7am to 7pm. A cap replacement, a damper swap, or a crown patch can often be handled on the same visit if the parts are on hand. Larger jobs like a liner install or a crown rebuild get scheduled with a written scope, but the visit to diagnose and price happens fast.
For jobs that need a lead time on materials – a DuraFlex liner, a custom chase cover, or a HeatShield application – the estimate comes first, then the install is scheduled. Call (844) 968-2733 for a free estimate. We answer 24/7.
How Often Should a Tujunga Chimney Be Inspected for Repair Needs?
Once a year, and before the first burn of the season. In Tujunga, where the foothill evenings get cold enough to run the fireplace most of the winter, that annual inspection is what keeps repair costs low. A $150 to $375 inspection catches the crown crack, the missing cap, or the cracked tile before they turn into a $2,000 liner job.
If you’ve had a chimney fire, a seismic event, or a noticeable change in draft, book an inspection regardless of the calendar. Call (844) 968-2733 for a free estimate.
Why Full-System Chimney Service Saves You Money
The real cost trap in chimney repair isn’t the price of any single item – it’s the cost of being handed off. An inspector who doesn’t do repairs writes a report, and you hire a mason. The mason finds the flue is the actual problem and refers you to a liner specialist. Three visits, three diagnostic charges, three sets of schedule coordination. That sequence routinely adds $400 to $800 to a job that should have been one scope.
Our five service categories – chimney sweep, inspection, cap and crown, chimney repair, and fireplace repair – sit with one company. The sweep comes with the inspection. The inspection findings are acted on the same visit or with a clear follow-up scope. The cap, the crown, the liner, and the firebox all get addressed by the same team.
We source and install components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are recognized names in the professional chimney and hearth trades, and they’re chosen for durability rather than bottom-dollar cost. A manufacturer-fitted Gelco or Famco cap, for example, is a different product from a generic hardware-store cover – it fits the flue correctly, it’s built for the weather, and it doesn’t rattle off in a windstorm.
Key Takeaways
- Most Tujunga chimney repairs fall in the $275 to $850 range; liner work runs $1,800 to $4,200.
- The three biggest cost drivers are chimney construction type, flue condition, and how long water has been getting in.
- A $185 cap and a $275 crown patch prevent $900+ repairs. Catching it early is the single best way to save.
- HeatShield resurfacing is the cheaper route over a full liner – when the flue qualifies.
- One call covers inspection and repair. No contractor hand-offs.
- Estimates are free. Our technicians have up to 9 years of experience across the full chimney system.
Get Your Chimney Priced in Tujunga
If your chimney has a cracked crown, a missing cap, a cracked flue, or water stains on the ceiling, the cost is knowable. A written estimate takes one visit, and the inspection tells you exactly which of the ranges above applies to your chimney. We work across Tujunga and the surrounding foothill neighborhoods, and we handle the diagnosis and the repair under one scope.
Call (844) 968-2733 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Pricing reflects the Tujunga market as of 2026. Chimney Sweep Tujunga offers free estimates – call (844) 968-2733. This page is written by the team at Chimney Sweep Tujunga.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Priya Mehta"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Michelle Vaughn"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Carmen Reyes