Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Burbank
If your fireplace has sat cold for two or three winters, the soot and creosote inside the flue hasn’t gone anywhere. Burbank chimneys are some of the most interesting we work on, because so many of them are original: brick stacks from the 1920s through the 1950s, clay-tile liners that have been through decades of hot fires, and a good number that were built with no liner at all. Our technicians have up to 9 years of experience reading exactly those systems.

We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. When you call, you get a straight answer about what your chimney needs and what it doesn’t. Call (844) 968-2733.
Why Burbank Homeowners Call Chimney Sweep Tujunga for Chimney Sweep
Burbank sits in a pocket where the housing stock changes fast. Drive from the flat tracts near the airport up into the hills and you go from 1950s prefab metal fireplaces to 1940s brick chimneys with no liner at all. A company that only knows one type of chimney will give you the wrong recommendation on the other. We handle both, plus the Spanish Colonial bungalows in between, and that’s a big part of why people in Burbank call us back.
The other reason is scope. When an inspection turns up a cracked crown or a spalled flue tile, we don’t hand you a business card and wish you luck. We can resurface a liner with HeatShield, fit a properly sized cap from Gelco, or set you up with an Olympia Chimney component, all as part of the same job. Discovery and repair live under one roof.
Our reputation in Burbank is built on one habit: we show you the evidence before we recommend anything. Plenty of homeowners here have been told they need a full liner within five minutes of a sweep walking in the door. We’d rather hand you the camera screen and let you see the flue for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Burbank
Five service categories cover the whole system: sweep, inspection, cap and crown, chimney repair, and fireplace repair. On a Burbank house, the first three usually come up in the same visit. Here’s how we approach each.
Level 1 Inspection
A Level 1 is the visual check for a chimney that’s in regular use and hasn’t changed since the last sweep. We look at the firebox, damper, flue, cap, and crown from ground level and from the roof. For a Burbank bungalow that gets a fire a few times each winter, this is often all you need to confirm nothing has shifted.
Level 2 Inspection
A Level 2 goes further: camera through the flue, full access to concealed areas, and a look at the appliance connections. In Burbank’s 91504 hillside homes, this is the inspection that matters, because an unlined brick flue can look fine from the firebox and be glazed solid ten feet up. Any change in fuel type, a new appliance, or a sale of the home is a reason to move up to a Level 2.
Creosote Removal
Creosote comes in three stages, and the third is the one that causes chimney fires. When it’s glazed into a hard shell on a flue tile, a standard brush just skates over the top of it. We use rotary cleaning tools sized to the flue to cut through that glaze, then camera the flue again to confirm it’s clean. That second pass is what separates a real creosote removal from a cosmetic sweep.
Soot Removal
Soot is the softer, fluffier fallout from a fire that burns cool or gets starved of air. It settles on the smoke shelf, coats the damper, and finds its way onto the firebox floor. We vacuum and brush the firebox and smoke chamber as part of any sweep, so you’re not left with a black dusting on the hearth the first time you light a fire afterward.
Trusted Brands We Service in Burbank
We work with a roster of professional-grade brands: DuraFlex for flexible stainless liners, HeatShield for liner resurfacing and repair, Gelco and Famco for fitted caps, and Olympia Chimney for components. These are the names the trade trusts, chosen for how long they last rather than what they cost. We don’t claim to keep parts sitting in a warehouse. What we do is source the right component for your chimney and get it installed without a long wait or a second contractor. When your flue calls for a specific product, you get that product, sized and fitted to the stack in front of us.
Common Chimney Sweep Problems We See in Burbank Homes
- Unlined brick flues in 1940s hillside homes. With no liner between the fire and the surrounding brick, creosote bakes directly onto the masonry and hardens into a glaze that brushes can’t touch. This gets misdiagnosed as a full liner replacement all the time, often without a camera ever going into the flue.
- Spalling and cracked clay tiles in Spanish Colonial bungalows. Decades of intermittent hot fires take a toll on the original tile liner. Once a tile cracks, creosote hides in the gap behind it, where a brush never reaches.
- Undersized or damaged dampers. Many original masonry fireplaces in Burbank were built with dampers that no longer seal. A damper that won’t close means heat up the flue in summer and cold air down it in winter, plus a draft that pulls smoke into the room.
- Prefab metal fireplaces in post-war tract homes. The 91504 and 91506 tracts have plenty of factory-built units with thin metal flues. Those need nylon brushes sized to the liner. Standard masonry tools can score and damage the metal, and some sweeps skip the camera entirely on these.
See the difference
Before
After
Before
After
Before
AfterWhy Burbank’s Older Chimneys Need a Closer Look
Here’s the local pattern that shapes most of our work in Burbank. The hillside neighborhood of 91504 has a high concentration of 1940s chimneys with no flue liner at all, just brick from the firebox to the crown. That construction isn’t automatically a problem, but it changes how creosote behaves. Without a smooth tile surface, the deposits grab onto rough brick and glaze into a hard shell far faster than they would in a lined flue. That shell needs rotary cleaning to remove, not a standard brush.

The flats tell a different story. The newer tracts in 91506 and the post-war homes around them have prefab metal fireplaces with liners that clean up easily with the right nylon tools. The risk there is a sweep who brings masonry gear to a metal flue. In Burbank’s older bungalows, a homeowner might burn wood only when a Santa Ana wind event rolls through or a cold snap hits, letting creosote harden on unlined tiles between cleanings. A qualified sweep puts a camera in the flue first, then rotary-cleans the glaze, and only then recommends a repair like a HeatShield liner or crown work, based on what the camera actually shows.
That’s the part we won’t skip. Nothing gets recommended here without camera evidence you can look at yourself. If your flue is sound and just dirty, you’ll hear that. If something can safely wait until next season, we’ll tell you that too. It’s when one flue in a dozen has an actual breach that we’ll show you the picture and explain what a real repair looks like.
Pricing for Chimney Sweep in Burbank, CA
A typical annual sweep in Burbank runs $150 to $300, depending on the flue type and how much buildup we’re removing. A Level 1 inspection usually lands in the $100 to $200 range when booked alongside a sweep, and a Level 2 with camera typically runs $250 to $450. Creosote removal on a glazed flue, the kind common in 91504, usually runs $350 to $600 because rotary cleaning takes more time and a second camera pass. Crown repair and caps are quoted separately once we’ve seen the top of the stack.
What moves the number: flue condition, roofline access, how long it’s been since the last cleaning, and whether the flue is lined tile or bare brick. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Burbank
Burbank isn’t the only place we work. We also serve homeowners in Toluca Lake, Glendale, North Hollywood, and Sun Valley, all of which share the same mix of older masonry chimneys and newer prefab units. If you’re just over the line in one of those neighborhoods, the same camera-first approach applies. Our chimney sweep team covers the whole area, so call and tell us where you are.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Burbank
Because many 91504 hillside homes have chimneys built in the 1940s with unlined brick flues, and a visual check can’t see the glaze or hidden cracks inside one. A Level 2 puts a camera through the flue so we know what’s actually there before recommending anything. Call (844) 968-2733 to book one.
Third-degree creosote is the glazed, hard-shell stage of creosote buildup, and it’s common in Burbank because so many original flues are bare brick or clay tile that get fired only occasionally. Infrequent, hot-burning fires bake the deposits into a shell a brush can’t touch. It takes rotary cleaning tools to remove. Call (844) 968-2733 if your flue hasn’t been cleaned in several seasons.
Yes. A camera run through the flue shows spalling tiles, open joints, and any gap where creosote can hide, all without opening a wall. You’ll see the same footage we do before we recommend a repair. Call (844) 968-2733 to schedule the inspection.
Once a year is the right rule even for light use, because Burbank’s sporadic burning is exactly what lets creosote harden between fires without anyone noticing. A quick annual sweep catches buildup before it glazes. Call (844) 968-2733 to get on the schedule.
Sometimes it’s genuine: a cracked tile or an unlined flue with glaze in the masonry is a real reason to reline, and HeatShield resurfacing is often the fix rather than a full replacement. But the recommendation should always come with camera evidence you can see, not a sales pitch. If a sweep can’t show you the problem, ask why. Call (844) 968-2733 for a second opinion with the camera running.
Before the burning season starts, or right after a storm knocks debris onto your cap, get the chimney looked at. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 968-2733 for a free estimate on a chimney sweep in Burbank.
Written by the team at Chimney Sweep Tujunga.