Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Sunland
Chimney repair in Sunland means more than patching a crack. It means making a flue safe to burn in a canyon-edge neighborhood where the Santa Ana winds come howling down Big Tujunga Canyon every fall. We work with homeowners across Sunland, from the mid-century ranches on the valley floor to the older cabins tucked into the hills, and our technicians have up to 9 years of experience with the clay-tile liners and old mortar crowns you find on these houses. We know the streets here and how the local housing stock fails, which matters when the fix has to hold through a windy season. Call (844) 968-2733 for a free estimate.

Why Sunland Homeowners Call Chimney Sweep Tujunga for Chimney Repair
We’re a full-system chimney company, not a one-task cleaning crew. When we find a cracked crown during a sweep, we can act on it rather than handing you a note and a referral. That matters more in Sunland than in most places, because a lot of the homes here have original 1940s and ’50s masonry with problems that compound if they sit. We work with HeatShield for liner resurfacing and Gelco and Famco caps, so we’re fitting manufacturer-quality parts instead of generic hardware-store covers.
Our technicians have up to 9 years of experience, and they’ve built a strong local reputation across the Sunland area by telling people plainly what needs fixing now and what can safely wait. Nothing gets recommended without camera evidence you can see for yourself. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. If you’re in the hillside streets off Apperson or Mt. Gleason, we’re familiar with the drive and the kinds of flues you’re likely to have.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Sunland
Mortar Repointing
Repointing is the work of grinding out failed mortar joints and packing in fresh mortar that will hold. In Sunland, that usually means joints that have crumbled after decades of hot summers and the freeze-thaw of mild-but-real winters in the foothills. Left alone, bad joints let water into the chimney body and start a chain of spalling that’s much more expensive to fix than the repointing itself.
Spalling Brick Repair
Spalling is when brick faces flake and fall away, and it’s common on the older ranch and cabin chimneys around Sunland where the brick was never sealed. Once a brick spalls, it can’t be glued back; the damaged units get cut out and replaced and the surrounding masonry gets re-bedded. We check the crown and flashing at the same time, because spalling almost always has a water source behind it.
Chimney Waterproofing
Waterproofing means a breathable sealer applied to the masonry so water sheds off but vapor can still escape. In Sunland this is the step that protects a repair for the long run, especially on the 1950s traction-ranch chimneys that have already been repointed once. We time it after any crown or brick work, so the sealer goes on sound masonry, not a fresh patch that hasn’t cured.
Flashing Repair
Flashing is the metal that seals the chimney to the roof, and it’s the most common source of leaks we find in Sunland. The Santa Ana winds work roof edges hard, and older flashing on these homes has often pulled loose or rusted through. A failed flashing job shows up as a water stain on the ceiling, not on the chimney itself, so it’s worth checking before the fall winds arrive.
Trusted Brands We Service in Sunland
We source and install components from a set of professional-grade brands in the hearth trade. That includes DuraFlex for flexible stainless liners, HeatShield for resurfacing damaged flues, and Gelco and Famco for fitted chimney caps. Naming the product matters because the material is the repair. We don’t claim to stock parts or keep a warehouse in Sunland; we specify the right part for your flue and get it on site. Most jobs come together in a single scope of work, and we’ll tell you up front when a part has to be ordered.
Common Chimney Repair Problems We See in Sunland Homes
- Glazed third-degree creosote. Wood stoves in the canyon-edge homes burn hot and often, and the creosote can glaze onto the tile so a rotary brush pass skips right over it. That liner needs hand-scraping or a resurfacing like HeatShield before it’s safe to use.
- Cracked 1940s-’50s mortar crowns. As the hillside settles, the old crowns crack and let water pour into the chimney body. That water then spalls the brick above the roofline, which is where the expensive damage starts.
- Uncapped flues packed with debris. The canyon wind carries soot and seed into open flues, and birds nest in the smoke chamber over the idle months. Many of these original flues never had a cap at all, so the fix starts with a custom-fabricated one.
- Original clay-tile liners that are undersized. A lot of these homes were built with narrow, unlined or clay-tile flues that don’t match how heavily they’re now used for heat. Weak draft and a smoky firebox usually trace back to the liner size.
Pricing for Chimney Repair in Sunland, CA
Our estimates are free, and the written estimate sets the final price. Nothing is recommended without camera evidence you can review first.
| Repair | Typical Sunland Estimate |
|---|---|
| Mortar repointing (partial) | $375 – $900 |
| Spalling brick repair | $400 – $1,200 |
| Chimney crown rebuild | $550 – $1,400 |
| Waterproofing application | $250 – $650 |
| Custom chimney cap fabrication and fit | $275 – $750 |
| Flashing repair | $250 – $650 |
Full relining with a DuraFlex stainless liner runs higher, typically four figures, and depends on flue height and liner size. Call (844) 968-2733 for an exact quote.
We Also Serve Cities Near Sunland
We work with homeowners across the surrounding foothills and valley too, and we can reach most of the nearby communities from our Chimney Repair service hub. That includes Sunland and its neighbors in Tujunga, Sun Valley, La Crescenta-Montrose, and Burbank. If you’re on the edge of the canyon or up in the hills, tell us where you are and we’ll confirm the drive.
See the difference
Before
After
Before
After
Before
AfterServing Sunland, CA – Our Local Coverage Area
We serve Sunland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Chimney Repair in Sunland
It usually needs relining, not just repair. A narrow, unlined clay flue can’t safely carry the smoke of a wood stove used as primary heat, so a flexible stainless liner sized to the appliance is the right fix. An inspector will confirm with a camera. Call (844) 968-2733 for a free estimate.
If it’s your main heat, sweep it more often than the once-a-year minimum – often twice a season. Heavy burning lays down creosote fast, and the glaze that forms on canyon-edge flues hardens over the mild idle winters. An inspection will tell you what interval fits your burn. Call (844) 968-2733 to book a sweep.
The winds themselves don’t crack the crown, but they dry the masonry and drive rain sideways once it comes, and settling of the hillside does the rest. A cracked crown lets water straight into the chimney body, which then spalls the brick. Repointing or rebuilding the crown early heads that off. Call (844) 968-2733 for a free crown estimate.
Yes – an idle chimney still fails. Birds nest and debris pack the smoke chamber over the quiet months, and creosote left in the flue hardens into a glaze that a quick sweep won’t touch. A Level 2 inspection catches it before your first fire. Call (844) 968-2733 to schedule.
We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield for the parts and materials your repair needs. Naming the brand means we’re matching the material to your flue, not grabbing whatever fits. Call (844) 968-2733 to talk through your job.
Same-Day Repair and Dispatch in Sunland
Most chimney repairs in Sunland can be assessed and quoted in a single visit, and we can often start the same day once the scope is agreed. Our phones are answered 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Closed on Saturday – a call on a Saturday is booked into the next opening, Sunday through Friday. We can work with your insurer where a repair is part of a claim.
What a Sunland Repair Visit Usually Involves
In the canyon-edge homes, a wood stove used as primary heat lays down creosote fast, and by the time a homeowner notices weak draft or a smoky firebox, the liner and crown often need attention. Original clay-tile liners and 1940s-’50s mortar crowns crack as the hillside settles, and an uncapped flue lets soot and bird nests pack the smoke chamber. A qualified local professional typically runs a Level 2 inspection, hand-scrapes the tile flue for hardened creosote, repoints or rebuilds the crown, and fits a custom chimney cap sized to the original flue opening. That’s the natural sequence in this neighborhood, and it’s the order we follow when you book with us.
Why so much emphasis on wildfire defense? Sunland sits at the mouth of Big Tujunga Canyon, where the dry Santa Ana winds funnel through the foothills each fall. Chimney work here is judged on spark arrestor integrity and third-degree creosote removal, not just whether smoke draws. Many of the 1920s-’50s canyon cabins have narrow, unlined flues with no chimney cap at all, so repair often begins with fabricating a custom cap rather than replacing a part that simply wore out.
In the hillside pockets off Mt. Gleason and Apperson, technicians routinely find chimney caps packed with soot and debris from the previous fire season, plus the occasional bird nest. The original flues often have no cap at all, so a standard visit starts with fabricating one on site. If your home falls in ZIP code 91040, that’s the neighborhood we’re working in.
What Actually Happens If You Skip It
A chimney that isn’t maintained doesn’t fail overnight. It fails over a few windy seasons, as the crown cracks and water works its way into the brick, and as creosote glazes on the flue and gets harder to remove each year. The result is a bigger repair than the one you started with. Acting before burning season is the practical move here – the mild winters mean fireplaces sit idle for months, allowing creosote to harden and nests to be built, so the quiet months are when the work is easy to do. We’ll tell you plainly when a repair can wait and when it shouldn’t.
What Happens When You Call
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’ll ask about your chimney, your appliance, and whether the flue is capped, then set a time for an inspection. The estimate is free, and the written estimate sets the final price.
Contact Us for a Free Chimney Repair Estimate in Sunland
Whether your crown is cracked, your flue is glazed, or you just want a real answer about an old uncapped chimney, we can help. We do the inspection and the repair in one place, with professional-grade materials and camera evidence you can review. Call (844) 968-2733 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.