Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Glendale
If water is streaking your firebox or the mortar joints on your chimney look wider than they did last year, you’re in the right place. Chimney Sweep Tujunga handles chimney repair across Glendale, from mortar repointing on a 1930s bungalow near downtown to crown and flashing work on hillside homes above the Verdugo canyons. We work on dense blocks where houses sit close together, roofs are steep, and one masonry stack often serves more than one fireplace. That kind of repair takes a whole-stack eye, not a patch on the part you can see. Call (844) 968-2733 and we’ll book a sweep and inspection. We answer 24/7.

Why Glendale Homeowners Call Chimney Sweep Tujunga for Chimney Repair
Glendale is not a place where you can look at one chimney and call it a day. The city’s older hillside homes in 91206 and 91208 were built with masonry fireplaces that see occasional use, so we run into less heavy creosote and more of what the local climate leaves behind: earthquake debris, bird nests, leaf litter pulled off the Verdugos, and cracked crowns that open up after a dry summer. Our technicians have up to 9 years of experience reading that pattern.
We also get callbacks from Glendale homeowners who hired a sweep that only cleaned and then referred the repair elsewhere. We don’t do that. Inspection findings get acted on with a clear scope, using components from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, so one call covers both diagnosis and the fix.
Roof access matters here too. On tight hillside lots, a stack tucked against a parapet or behind a low roof pitch is a ladder-and-harness job, not a quick hop up. We plan for that. The local pro we connect you with is licensed and insured as their state requires, and every repair comes with a flat-price scope agreed before the work starts, plus a camera inspection and photo report you can review yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Glendale
Chimney repair in Glendale mostly comes down to water. Roofs shed it, canyons funnel it, and masonry that has baked through months of dry heat takes it badly when the first December rain arrives. Our chimney repair work covers the four failures we see most often on Glendale homes.
Mortar Repointing
Repointing means grinding out failed mortar joints and packing them with fresh mortar matched to the original. On Glendale’s 1920s – 1950s Spanish Revival and Tudor bungalows, the joints between brick courses and around tile flues are where water gets in first. Seismic settling widens those joints over the years, and once they’re open, rain runs behind the brick. A typical mortar repointing job in Glendale runs about $550 – $1,400 depending on how much of the stack is affected and whether scaffolding or roof rigging is needed. We match the mortar color and profile so the repair blends into the original masonry.
Chimney Crown Repair
The crown is the concrete cap on top of the stack, and it takes the full force of Southern California sun. When it cracks, water runs straight down the flue instead of off the roof. On a 1930s Spanish bungalow off Adams Hill or in the Rossmoyne area, a cracked crown is usually behind the streaks you find in the firebox after a big rain. Crown repair in Glendale typically runs $450 – $1,200. We rebuild or resurface the crown with the correct slope and overhang, and where the flue liner needs resurfacing, HeatShield is the material we reach for.
Spalling Brick Repair
Spalling is brick that has absorbed water, frozen or dried out, and lost its face. You’ll see flaking or crumbling on the stack, and once it starts it feeds itself. On Glendale homes with original masonry, spalling often shows up where a chimney was patched before or where flashing has been letting water in for years. We cut out and replace the damaged brick and repoint around it. Typical spalling repair in Glendale runs $400 – $1,100, and if enough of the stack is gone, we’ll tell you plainly when a rebuild is the better spend.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of chimney leaks we find in Glendale. Tar patches and caulk don’t hold up through the seasonal swing from dry heat to winter rain. We replace failed flashing with properly stepped and counter-flashed metal, sealing the roof line so water runs around the stack instead of into it. Flashing repair in Glendale runs about $350 – $900. We also handle tuckpointing and full chimney rebuilding when a stack is past patching.
Trusted Brands We Service in Glendale
We source components from a roster of professional-grade brands: DuraFlex for stainless flue liners, HeatShield for liner resurfacing and joint repair, and Gelco and Famco for fitted chimney caps. Those names matter because a cap that doesn’t fit the flue properly lets in everything a cap is supposed to keep out. We don’t claim to stock parts or carry inventory; each job gets specified to the chimney in front of us and sourced for it. That keeps the material right and turnaround predictable. When a repair calls for Olympia Chimney or Copperfield components, we’ll specify those too. If you’ve got a failed system of any of these brands, we can diagnose and quote the fix in one visit.
Common Chimney Repair Problems We See in Glendale Homes
- Cracked crown and open tile-flue joints. On 1920s – 1950s masonry, the crown cracks first and the flue joints open next, so rain streaks the firebox on the first winter storm. Repointing the visible unit and ignoring the rest of the stack just moves the leak.
- Neighbor’s appliance venting into a shared or abutting flue. In Glendale’s attached and closely-spaced hillside homes, a shared stack can cross-contaminate smoke and carbon monoxide back through the damper into an adjacent unit. That’s a whole-stack diagnosis, not a single-firebox fix.
- Spalling brick and failed flashing on parapet-adjacent stacks. Where roof access is a ladder-and-harness job on a tight hillside lot, flashing failures and spalling go unnoticed while seismic settling widens the joints.
- Grit and leaf litter from the Verdugo canyons. Santa Ana winds push dry leaves, grit and seed pods into open flues. A cap that fits properly stops it; a loose generic cover doesn’t.
See the difference
Before
After
Before
After
Before
AfterThe Shared-Stack Problem Most Glendale Chimney Repairs Miss
Because Glendale’s attached and closely-spaced hillside homes in 91206 and 91208 often share or abut a single masonry stack, a repair on one firebox can affect a neighbor’s draft. That’s the part that catches people out. A homeowner calls about a water stain on their own firebox, and the honest answer is that the whole stack needs to be looked at: crown, flue liner and every firebox connected to it, because fixing one and leaving the other is how cross-contamination starts. A proper diagnosis here checks the whole shared stack, not just the unit with the visible crack.

Here’s how this kind of job usually goes. In a 1930s Spanish Revival or Tudor bungalow near downtown Glendale, the repair call tends to start with water streaking the firebox after the first December rain. The sun-baked chimney crown has cracked, and the tile flue liner has opened at a mortar joint. In attached properties, the same technician often finds a neighboring appliance venting into the shared stack. The fix runs from crown rebuild and mortar repointing to verifying the flue liner and smoke chamber draw correctly for every connected firebox, not just the one the homeowner called about. That’s what we mean by a whole-stack job.
Pricing for Chimney Repair in Glendale, CA
Chimney repair in Glendale is priced per job, and the written estimate sets the final number. Here’s what the work typically runs:
- Flashing repair: $350 – $900
- Spalling brick repair: $400 – $1,100
- Crown rebuild or resurfacing: $450 – $1,200
- Mortar repointing (tuckpointing): $550 – $1,400
- HeatShield flue liner resurfacing: quoted after inspection
- Partial or full chimney rebuild: quoted after inspection
What moves the number is how much of the stack is affected, whether a shared or abutting flue is involved, and how hard it is to get to the roof on a tight hillside lot. We don’t recommend anything without camera evidence you can see for yourself, and if a repair can safely wait until spring, we’ll say so. Estimates are free, and the flat-price scope is agreed before we book.
We Also Serve Cities Near Glendale
Glendale sits close to a lot of the work we do, and we also serve Burbank, La Crescenta-Montrose, La Cañada Flintridge and Toluca Lake. Same approach everywhere: whole-stack diagnosis, camera inspection with a photo report, and the repair handled in the same call or a clearly scoped follow-up. If you’re reading this as a Glendale homeowner, we know the housing and the weather.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Glendale
Yes. In a shared or abutting masonry stack, anything that changes the flue’s draw on your side can change it on theirs. A shared stack needs a whole-stack inspection before any repair, so crown, flue liner and every connected firebox are checked together. Call (844) 968-2733 to book that inspection. Estimates are free.
The crown has usually cracked, and the tile flue liner has opened at a mortar joint. Glendale’s dry-then-wet seasonal swing is hard on sun-baked masonry, and once water gets behind the brick it finds the firebox. We inspect, photograph what we find, and quote the crown, repointing and liner work as one scope. Call (844) 968-2733 for an exact quote.
Yes, because the risk here isn’t heavy creosote; it’s everything that collects while the chimney sits idle. Earthquake debris, bird nests and leaf litter from the canyons build up over months, and a cracked crown can let water in for a whole season before you notice. An inspection before the burning season catches it. Call (844) 968-2733 to schedule one.
They can. Dry leaves, grit and seed pods get driven into open flues off the Verdugo Mountains and canyons, and a loose or missing cap lets it all straight down. A fitted cap from Gelco or Famco stops most of it. If you’re not sure your cap fits properly, call (844) 968-2733 and we’ll take a look. Estimates are free.
Repointing is usually enough when the brick faces are solid and the damage is in the mortar joints; a rebuild is the honest answer when enough brick has spalled or the stack has lost structural integrity. We make that call from the camera inspection and show you the evidence, so you’re not taking it on faith. Call (844) 968-2733 for an exact quote.
Chimney repair in Glendale comes down to one thing: address the whole stack, not the one stain you can see. Our technicians have up to 9 years of experience, we work with professional-grade materials, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 968-2733 for a free estimate.
Written by the team at Chimney Sweep Tujunga.