Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Burbank
If your Burbank crown is a cracked mortar wash and your cap is rusted through, that’s a fixable problem – and you don’t need to replace a whole chimney to solve it. We install, replace, and repair caps and crowns on Burbank homes, and we do it from a full-system view: draft, liner, crown, and cap checked together. If you’re not sure what’s up there, that’s exactly what the visit is for. Call (844) 968-2733 for a free estimate.

Why Burbank Homeowners Call Chimney Sweep Tujunga for Chimney Cap & Crown
Burbank has plenty of chimney cleaners who sweep and leave. We focus on the parts of the system everyone else looks past – the crown that sheds the water, the cap that keeps the weather and wildlife out, and the liner that carries the flue gases safely. When our inspection turns up a problem, it gets handled in the same scope, not referred to another contractor.
The props matter. We source professional-grade components from names like DuraFlex, HeatShield, and Gelco. That means a fitted Gelco cap sized to your flue instead of a generic hardware-store cover, a HeatShield resurfacing product for a liner that can be saved, and DuraFlex when a full reline is the honest answer. We don’t stock parts in a truck, so we won’t pretend a cap is sitting around waiting. We measure, order what fits, and get it back onto your roof fast.
Our technicians have up to 9 years of experience, and they know the difference between a 1940s hillside brick stack and a 1950s prefab in the flats. That matters more here than in most towns.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Burbank
Cap Installation
A new cap has to match your flue, and in Burbank that means more than reaching for whatever fits. Single-flue stacks and the shared multi-flue chimneys common on the older bungalows don’t take the same piece. We measure the flue, fit a properly sized Gelco or Famco cap, and set it so the animals and wind-blown debris stay out while the draft still pulls.
Cap Replacement
Post-war homes in the 91506 tracts often have a factory cap that has simply rusted out after years of weather. When the metal has rotted through or a Santa Ana wind dropped a branch on it, replacement is usually straightforward once we’ve had a look. If the flue beneath is sound, the new cap goes on and the job’s done.
Crown Repair
The crown is the concrete or mortar top of the chimney, and on Burbank’s older homes it’s often a thin wash that has started to crack and spall. A failing crown is the front door for winter rain, which then soaks the brick on the stack above the firebox. We rebuild the crown with a proper slope and overhang so it sheds water the way it should have all along.
Crown Coating
When a crown is sound underneath but cracked on the surface, a coating can seal it without a full rebuild. We use HeatShield where the crown can be saved, and we say plainly when a rebuild is the better call. If it can wait a season, we’ll tell you. Not every crack needs surgery today.
All of this sits inside our chimney cap & crown work, and it’s how we serve Burbank – one team for the crown, the cap, and whatever the inspection finds beneath them.
Trusted Brands We Service in Burbank
We work with a set roster of professional chimney brands, and we’re careful about what we name. DuraFlex liners, HeatShield resurfacing, Gelco and Famco caps, Olympia Chimney components. These are the names the trade uses on real jobs, not the cheapest hinge-store stock. What we don’t claim is a local parts warehouse – we don’t have one. We quote the fit, bring the right component, and turn the job around quickly once material lands. Manufacturer-grade caps beat generic covers every time on an exposed Burbank roof.

Common Chimney Cap & Crown Problems We See in Burbank Homes
Burbank’s housing spans a lot of ground, and the chimneys reflect it. Here’s what we run into most.
- Thin mortar wash crowns on 1920s – 1950s bungalows. These crack and spall with age, letting winter rain into the brick stack above the firebox. A rebuilt crown with real slope and overhang stops it at the source.
- Rusted or missing caps on post-war prefab fireplaces. The flatter tracts around 91506 often have factory metal caps that have simply corroded away, opening the flue to limbs, leaves and birds.
- Santa Ana wind damage to caps. When fall winds drop limbs on the roof, a cap can take a direct hit. A bent or dislodged cap kills draft the same as no cap at all.
- Undersized or damaged dampers and smoke chambers. Old open-hearth fireplaces pull poorly once a new cap changes the draft profile, so the damper gets checked at the same time.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Burbank, CA
Here’s what this kind of work typically runs in Burbank. A standard fitted cap runs around $250 – $650 depending on single or multi-flue and finish. Crown repair on a masonry chimney typically lands between $350 and $900, and a full crown rebuild runs roughly $700 – $1,500 when the top course has spalled. Crown coating, where the crown is sound, is usually $200 – $450. Those figures are typical estimates, not final prices – the written estimate sets what you pay. What moves the number is cap size, how much brick is bad, and whether the flashing has to be reworked.
The real concern on any older Burbank chimney is being told you need thousands in unneeded work. Nothing here gets recommended without camera evidence you can see on-screen. If a crown can wait, we’ll say so. That’s a free estimate, no strings.
We Also Serve Cities Near Burbank
Burbank sits next to a stretch of towns with the same older housing stock and the same cap-and-crown problems. We also take cap and crown work in Toluca Lake, Glendale, North Hollywood, and Sun Valley. If you’re just over the line, the drive is short and the visit is the same.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Burbank
Yes, an unlined brick stack can be capped. The cap protects the opening; it doesn’t change what’s inside the flue. But on those old 1940s hillside chimneys, we want to camera the stack first, because the flue may carry glazed creosote that needs rotary cleaning before the cap goes on. Call (844) 968-2733 for an exact quote.
The hillside crown takes more weather. Homes in the 91504 blocks sit above the flats and catch the wind and rain differently, so a thin mortar wash on a 1940s brick stack cracks faster than a sound crown on a newer tract. A proper rebuild with real slope and overhang holds up far better than a patched wash. Call (844) 968-2733 for an exact quote.
Usually, yes. If the flue beneath is intact, a new fitted cap is the whole fix. We’ve replaced plenty after wind damage. The one caveat: a branch heavy enough to bend the cap can also crack a thin crown, so we check both on the same visit. Call (844) 968-2733 for an exact quote.
You still want a proper cap, just one that matches a gas vent rather than a wood flue. A converted open hearth with no cap lets rain and birds down the flue, and the older your Burbank home, the flakier the factory cap tends to be. Fit one correctly and you stop that. Call (844) 968-2733 for an exact quote.
You see it on the camera. We put the cracked crown and any spalled brick on-screen, so you’re looking at the problem, not taking our word for it. No crown or cap work gets quoted without that evidence. Call (844) 968-2733 for an exact quote.
Contact Chimney Sweep Tujunga for Chimney Cap & Crown in Burbank
Whether your cap is on its last leg or your crown has been cracking for a couple of seasons, we’ll look, show you what we find, and quote the fix in writing. The estimate is free and the final price is set by that written scope. No parts are assumed on a truck; we fit what’s right and get it installed. Call (844) 968-2733 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Chimney Sweep Tujunga.