Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Tujunga Homeowners
Most chimney problems in Tujunga go unnoticed until they become expensive. A cracked crown lets rain into the masonry all winter, and by spring you’re looking at rebuild work instead of a repair. That’s the gap a real inspection closes. Our technicians have up to 9 years of experience reading flue liners, draft systems, and crown condition, and we bring that knowledge into every home we enter. We answer 24/7, and fast dispatch from 7am to 7pm gets us to Tujunga homes on the same day in most cases. Call (844) 968-2733 to book your inspection before the burning season catches you off guard.
What Our Chimney Inspection Service Includes
An inspection isn’t a quick glance up the flue. It’s a structured evaluation of your whole chimney system, scaled to how much access the job requires. We offer six distinct inspection types, and we’ll tell you honestly which one your situation calls for.
Level 1 Inspection
A Level 1 inspection covers the readily accessible portions of your chimney and venting system, without tools that require opening anything up. It’s the right choice when your chimney has been in continuous use, nothing has changed, and you just need an annual check before burning season. We visually assess the firebox, damper, flue interior, and exterior condition, then give you a clear written summary of what we found.
Level 2 Inspection
A Level 2 inspection goes further, using a camera to examine the flue from the inside and checking accessible attics, crawlspaces, and connected appliances. You need one after a chimney fire, after any change in fuel type or appliance, when you buy a home, or after an earthquake or storm event. We perform Level 2 inspections with the same equipment and documentation we’d want in our own homes.
Level 3 Inspection
A Level 3 inspection is the most involved and is reserved for situations where a hidden hazard is suspected and access requires removing parts of the chimney or building. It’s typically triggered by a confirmed event like a chimney fire or a known structural concern. We walk you through exactly what access is needed and why before any removal work begins, so there are no surprises.
Camera Inspection
Camera inspection lets us see the inside of your flue without guesswork. We run a specialized camera through the length of the chimney and record what it finds, including gaps in the liner, cracked tiles, and creosote buildup hidden from a visual check. You’ll see the footage yourself, because you should be able to verify what we’re telling you before agreeing to any repair.
Flue Inspection
A flue inspection focuses specifically on the passage your smoke and gases travel through. We check for correct sizing, blockages, liner damage, and proper draft performance. Issues here affect how safely and efficiently your fireplace burns, and a flue problem is one of the most common reasons smoke backs up into a room.
Real Estate Inspection
When a home is changing hands, a real estate chimney inspection gives buyers and sellers a documented picture of the system’s condition. We identify what’s serviceable, what needs repair, and what’s a legitimate safety concern versus normal wear. Our reports are written to be useful to everyone at the closing table, not just to justify more work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with a roster of professional-grade brands that hold up in real chimney environments, not just on a spec sheet. DuraFlex liner systems are among the products we inspect and work with regularly, and we know where their components tend to wear first, from the connection points to the liner walls. HeatShield products come into play when a liner needs resurfacing or repair rather than full replacement, and inspecting HeatShield-treated flues requires understanding how that application performs over time.
Olympia Chimney and Gelco components show up in a lot of the caps and venting systems we examine, and we’re familiar with how each one ages in the field. Whether your chimney has DuraFlex, HeatShield, Olympia Chimney, Gelco, or another system entirely, our chimney sweep tujunga and inspection team can assess it accurately and tell you what condition it’s really in.
Signs You Need Chimney Inspection Right Now
- Creosote buildup visible in the firebox or flue: Glazed creosote is the fuel that turns a small fire into a chimney fire. A camera inspection determines how thick the buildup is and whether a sweep needs to come first.
- Smoke rolling back into the room when you burn: Backdraft usually points to a draft or flue-sizing problem, sometimes a blockage. It’s a sign the system isn’t venting the way it should, and it’s worth diagnosing before your next fire.
- Water stains or crumbling mortar on the chimney exterior: These point to a crown or flashing failure that lets moisture into the masonry. Small crown cracks get worse through a Tujunga rainy season and rarely fix themselves.
- Birds, squirrels, or debris in the flue: Anything nesting in your chimney narrows the passage and can block carbon monoxide from venting. A cap solves the recurring problem, but an inspection confirms what’s happened inside.
- You’ve just bought the home or changed what you burn: A new-to-you chimney has no known history, and a change in fuel or appliance changes the venting requirements. Either case calls for a Level 2 inspection before you light it.
Our Chimney Inspection Process – Step by Step
- 1
We start with the outside. We check the crown, cap, flashing, and masonry for cracks, water damage, or missing components. The exterior tells us a lot about what’s happening internally before we ever put a camera in the flue.
- 2
We examine the firebox and damper. We look at the firebox walls, damper operation, and whatever appliance connects to the flue. This tells us how the system has actually been used and what it’s rated to handle.
- 3
We run the camera through the flue. A video camera traces the full length of the liner, recording gaps, cracks, offsets, and creosote. You see the footage with us, and we point out exactly what’s normal wear and what isn’t.
- 4
We photograph and document everything. You receive a written summary of findings with photos, sorted into what needs attention now, what can wait, and what’s already in good shape. Nothing gets recommended without evidence you can see.
- 5
We give you a clear next step. If a sweep, cap, or repair makes sense, we can schedule it right there. If everything’s fine, we’ll tell you that too, and it won’t cost you a thing beyond the inspection.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Tujunga?
A typical Level 1 inspection in Tujunga runs $150 – $250, while a Level 2 with camera work generally falls between $275 – $500 depending on access and how much of the system needs examining. A real estate inspection follows similar pricing to a Level 2, and a Level 3, which involves opening up parts of the chimney, runs higher and is quoted per job once we know the scope.
What moves the price: the inspection level, whether a camera run is required, attic or roof access, and how much disassembly a Level 3 needs. Pet hair and heavy soot don’t change the number; access does. You avoid overpaying by knowing in advance what level you actually need, which is why we quote per job with a written estimate rather than a flat rate call-out.
Every estimate is free, and the written estimate sets the final price. Here’s roughly what to expect:
- Level 1 inspection: typically $150 – $250
- Level 2 inspection with camera: typically $275 – $500
- Real estate inspection: typically quoted near Level 2 pricing
- Level 3 inspection: quoted per job after we assess required access
Call (844) 968-2733 for an exact quote; estimates are free.
Chimney Inspection Near Tujunga – Our Service Area
Alongside Tujunga, we book inspections across Sunland, La Crescenta-Montrose, Burbank, Sun Valley, Glendale, La Cañada Flintridge, North Hollywood, Toluca Lake, and Valley Village. Drive times across the Crescenta Valley are short, so most of these areas see prompt scheduling once a sweep is booked, and our chimney inspection team covers the neighboring foothill neighborhoods with the same equipment and documentation.
Serving Tujunga, CA – Our Local Coverage Area
We serve Tujunga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Tujunga
A chimney inspection is a structured evaluation of your entire chimney system, from firebox to crown, checking for safety hazards, structural damage, and venting problems. It goes beyond sweeping, which only removes creosote, by documenting the actual condition of the liner, crown, and connected components. After ours, you get a written report with photos so you know exactly what shape your chimney is in. Call (844) 968-2733 to book one.
A Level 1 inspection usually takes 30 to 45 minutes, while a Level 2 with camera work runs closer to an hour. Level 3 inspections take longer depending on the access required. We schedule the time properly so the inspection isn’t rushed and the findings are accurate.
A typical inspection in Tujunga runs $150 – $500 depending on the level you need, with Level 1 at the low end and Level 2 with camera work toward the higher end. Level 3 is quoted per job once we know the scope. The written estimate sets the final price, and estimates are free. Call (844) 968-2733 for an exact quote.
Yes. We inspect and work with DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield components, and we know where each brand’s products tend to wear or fail. That familiarity means we can spot the failure points specific to your system rather than giving a generic verdict. Call (844) 968-2733 to book.
Same-day inspections are possible depending on the schedule. We answer 24/7, and fast dispatch from 7am to 7pm Sunday through Friday gets a technician to your door once a booking is confirmed. A call outside dispatch hours is booked into the next opening. Call (844) 968-2733 to schedule.
Warranty terms depend on the specific repair and the materials involved, and we’ll put the terms in writing before any work begins. The inspection itself is documented with photos so the scope is clear. Call (844) 968-2733 to talk through a specific repair.
Clear the hearth and the area in front of the fireplace so we can work safely, and make sure we can access the attic if a Level 2 is booked. If both are clear, there’s nothing else you need to do. Call (844) 968-2733 if you’re unsure what your appointment requires.
Schedule Your Chimney Inspection Service in Tujunga Today
One inspection tells you what your chimney actually needs and what can safely wait, backed by photos you can see for yourself. We find it, document it, and fix it if repair is warranted, all through one company with professional-grade materials. Call (844) 968-2733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.
Written by the team at Chimney Sweep Tujunga.