Chimney Cap & Crown in Tujunga, CA | Chimney Sweep Tujunga

Chimney Cap & Crown in Tujunga - Measured and Fitted, One Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Cap & Crown for Tujunga Homeowners

The cap on top of your chimney is the first line of defense against rain, birds, squirrels, and the fine debris that Tujunga’s canyon winds push across the foothills. When the cap rusts through or a cracked crown lets water seep into the masonry, you don’t just get a leak; you get a slow breakdown that can spread into the flue and the firebox. Our technicians have up to 9 years of experience working with the brands that hold up in this climate, and we carry professional-grade materials from DuraFlex, Gelco, Olympia Chimney, and others. We answer 24/7 at (844) 968-2733 and can often schedule a cap or crown repair the same day you call.

Call (844) 968-2733

What Our Chimney Cap & Crown Service Includes

Cap and crown work covers the top of the chimney system, and the small details here determine whether the rest of the flue stays dry through the rainy season. We handle the fabrication, the repair, and the coating as one scope so you don’t have to coordinate separate trades.

Cap Installation

A chimney cap is the metal or mesh cover that sits on top of the flue to keep water, animals, and airborne debris out. If your chimney has no cap, or only a rusted mesh screen, installing a proper one is the cheapest way to prevent water intrusion and wildlife entry. We fabricate and fit caps using Gelco and Olympia Chimney components, sized to your flue dimensions and matched to the crown.

Cap Installation

Cap Replacement

Caps deteriorate from UV exposure, rain, and the heat that rises off the flue. A cap with loose fasteners, a bent lid, or a torn screen no longer keeps animals out and may rattle in the wind. We source direct-fit replacements from Gelco and Famco so the new cap seats correctly on the existing crown rather than wobbling on mismatched hardware.

Cap Replacement

Crown Repair

The crown is the concrete or masonry slab at the top of the chimney that sheds water away from the flue. Hairline cracks widen with each wet season, and once water gets behind the crown it can work down into the mortar joints and the flue itself. We cut out failing sections and rebuild the crown with a proper slope so water runs off instead of pooling.

Crown Repair

Crown Coating

A crown coating is a flexible, weather-resistant membrane applied over sound masonry to seal minor cracks and block moisture before it gets in. It’s appropriate when the crown is intact but starting to show surface checking or has been patched before. We use HeatShield crown coating materials because they flex with the masonry instead of cracking at the first temperature swing.

Multi-Flue Cap

A multi-flue cap covers the full chimney top, sheltering several flues under one lid instead of capping each individually. If your Tujunga home has a fireplace and a furnace flue side by side, a single over-cap is often simpler and better looking than two small caps. We measure the full crown and fabricate the cap to fit with proper clearance for draft.

Custom Cap

Some chimneys have an irregular crown, an oversized flue, or a shape that stock caps won’t fit. A custom cap is built to the actual dimensions of your chimney so it sits level and seals properly. We take the measurements on site and have the cap fabricated in the metal and finish that suits the house.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 968-2733

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Brands We Service for Chimney Cap & Crown

We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and each brings something different to cap and crown work. Gelco and Famco caps are built to fit specific flue and crown dimensions, and we know where those caps tend to wear first, usually at the fasteners and the screen seams. Olympia Chimney components are what we reach for when the crown and flue need to work together as a system, and their caps hold their shape under the summer heat that builds on Tujunga rooftops.

HeatShield is the name we turn to for crown coating and masonry resurfacing where the crown needs a flexible seal rather than a full rebuild. DuraFlex comes into play when a cap or crown repair uncovers a flue liner problem underneath, and we can address it in the same scope. Whether you have a Gelco cap that’s seen better days, a HeatShield-coated crown that needs refreshing, or a cap from any other make, we can help.

Signs You Need Chimney Cap & Crown Right Now

Most cap and crown problems show up as small symptoms before they become structural. Here’s what we see most often on Tujunga chimneys.

  • Water stains on the ceiling or chimney breast. A cracked crown or a missing cap lets rain straight into the flue, and the stain usually appears well before the damage is visible from the roof. If you see a brown ring spreading on the ceiling near the chimney, get it looked at before the next storm.
  • Rust streaks on the cap or firebox. A rusted cap has lost its protective coating and is starting to fail at the fasteners. Rust in the firebox often means water is running down the flue from above.
  • Birds, squirrels, or debris in the firebox. An open flue or a torn cap screen lets animals nest inside, and nesting material is a fire hazard. A proper cap with an intact screen stops this immediately.
  • Visible cracks or crumbling mortar on the crown. Cracks wider than a hairline, or masonry that crumbles when you touch it, mean the crown is no longer shedding water. Left alone, the damage works down into the flue and the surrounding structure.
  • The cap is loose or tilted. A cap that shifts in the wind or sits off-center no longer seals, and it can blow off entirely in a strong gust. Loose caps are a quick fix now and a bigger repair later.

Our Chimney Cap & Crown Process – Step by Step

  1. 1
    Visual inspection from the roof and the firebox. We look at the cap, crown, flue, and firebox together because cap problems often point to issues below. We take photos of anything we find so you can see exactly what we see.
  2. 2
    Camera inspection when the crown or flue looks compromised. If the crown is cracked or the flue shows signs of water damage, we run a camera down the flue to check the liner before recommending any repair. Nothing gets quoted without evidence you can review.
  3. 3
    Written estimate with a clear scope. You get a flat-price estimate that lists the cap or crown work, the materials, and any related repair we found. The estimate sets the final price, and we don’t start until you approve it.
  4. 4
    Repair or installation. We remove the old cap or failing crown sections, prep the surface, and install the new component using Gelco, Olympia Chimney, or HeatShield materials as the job calls for. The work is done in one visit whenever the scope allows.
  5. 5
    Final check and photo report. We confirm the cap is seated, the crown sheds water, and the flue is clear, then send you the photos so you have a record. If anything else needs attention down the line, you’ll know before it becomes urgent.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (844) 968-2733

How Much Does Chimney Cap & Crown Cost in Tujunga?

Cap and crown work in Tujunga typically runs from a few hundred dollars for a standard single-flue cap up to well over a thousand for a full crown rebuild on a large or irregular chimney. The ranges below are typical estimates for the most common scenarios; the written estimate you receive on site sets the final price.

  • Standard cap installation: typically $180 – $420 depending on flue size and whether the crown needs minor prep.
  • Cap replacement: typically $200 – $450, including removal of the old cap and refitting.
  • Crown coating: typically $300 – $600 for a sound crown that needs sealing rather than rebuilding.
  • Crown repair or rebuild: typically $600 – $1,500 depending on the size of the crown and how much masonry has to be cut out.
  • Multi-flue or custom cap: typically $450 – $1,200, driven by the footprint and the metal or finish you choose.

Several things move the price: the size and shape of the crown, whether the flue liner is sound or shows damage underneath, how accessible the roof is, and the material you select. You avoid overpaying by getting a written scope before work begins and by knowing that a cap or crown estimate should always include a look at the flue, not just the top slab. Our estimates are free and include a camera inspection and photo report when the crown looks compromised.

Chimney Cap & Crown Near Tujunga – Our Service Area

We serve Tujunga and the surrounding foothill communities, including Sunland, La Crescenta-Montrose, Burbank, Sun Valley, Glendale, La Cañada Flintridge, North Hollywood, Toluca Lake, and Valley Village. Response times depend on the day and the job, but we schedule promptly and keep you informed. For neighboring work, see our chimney cap & crown page for Sunland and our chimney cap & crown page for La Crescenta-Montrose.

Serving Tujunga, CA – Our Local Coverage Area

We serve Tujunga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Chimney Cap & Crown in Tujunga

Schedule Your Chimney Cap & Crown Service in Tujunga Today

A cap or crown that’s failing lets water into the system every time it rains, and the repair only gets bigger the longer it waits. Call (844) 968-2733 to book a free estimate. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and inspect the full system so you know exactly what’s needed before any work begins. You can also start with a chimney inspection, a chimney sweep, or our chimney repair and fireplace repair services. For the parent service overview, visit Chimney Sweep Tujunga.

Written by the team at Chimney Sweep Tujunga.

Why Tujunga Chooses Chimney Sweep Tujunga

We set the standard for chimney cap & crown in Tujunga.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Tujunga

Getting your chimney cap & crown project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

The local pro we connect you with does the work on the date in your quote, backed by a workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Tujunga Customers Say

Trusted by homeowners across Tujunga and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Priya Mehta
★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Michelle Vaughn
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Carmen Reyes

Ready for Chimney Cap & Crown in Tujunga?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and ready to schedule your free estimate in Tujunga.

(844) 968-2733

Request a Free Estimate in Tujunga

Tell us about your chimney cap & crown needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - We Answer 24/7