Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Tujunga Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning and service in Tujunga, CA. DuraFlex is a flexible stainless steel chimney liner, and it rewards a shop that knows how flexible liners actually behave in service: how the wrap holds, how the top seal ages, how a tight offset bends a run. Chimney Sweep Tujunga handles the full system, from Level 2 inspection through creosote removal to cap and crown work, so a problem found during a sweep gets a scope on the same visit. We are an independent service provider. We’re not affiliated with, authorized by, or a dealer for DuraFlex, and we don’t claim to be. Call (844) 968-2733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Tujunga for Your DuraFlex Chimney Cleaning?
Our technicians have up to 9 years of experience, and a good share of that time is spent pulling and reading liners rather than just brushing them from the top. A flexible stainless liner has to be inspected end to end, not eyeballed at the cap. We run a camera down the run and look at the surfaces that fail first: the insulation wrap along the upper section, the top plate seal, the connector at the appliance collar, and any offset where the flue narrows.
On the parts side, we repair and install DuraFlex equipment using quality parts that fit it. We don’t claim to stock genuine or OEM DuraFlex components, and we won’t tell you a part is factory original when it isn’t. What you get is a component matched to the specification of what’s already in your flue so the fit and the draft stay where they should be.
Warranty-safe practice matters here. We document liner condition with photos before and after, we don’t alter a sound liner to sell a reline, and we don’t apply anything to the flue interior that a manufacturer’s care instructions wouldn’t allow. If your liner is still under a manufacturer warranty, that paper trail is what you want in hand. HeatShield and Gelco work sits in the same workflow, so a resurfacing need or a fitted cap doesn’t turn into a second contractor.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Tujunga
Flexible stainless liners tend to fail in a handful of predictable ways. Here’s what we actually find in Tujunga flues, and why each one happens.
- Insulation wrap separating or sagging. The wrap around a flexible liner can pull loose or droop over time, usually after repeated heat cycling and moisture intrusion. The top section ends up uninsulated, which means a faster cool-down, heavier creosote condensation on the smooth wall, and weaker draft on cold starts. In a Tujunga fireplace used as backup heat through an overnight freeze, that combination shows up fast.
- Top plate and cap seal failure. The plate that closes the flue at the crown is the liner’s first line of defense against weather. When its seal goes, rain and debris run down the inside of the liner, and you get rust pitting and creosote staining along the smooth wall. Older canyon homes often have no cap at all, which makes this the most common single cause we trace.
- Loose or mis-sized appliance connector. The joint where the liner meets the appliance collar has to be snug and correctly sized. When it isn’t, creosote falls past the collar into the firebox and smoke leaks into the chimney chase instead of going up. Homeowners notice the smell in the room before they notice anything else.
- Fatigue cracks or crushing at the offset. A flexible run that was over-flexed at install, or squeezed through a flue that was tight to begin with, develops fatigue cracks or a crushed section at the elbow. That pinches the flue and traps creosote right where it’s hardest to reach with a brush.
- Creosote loading in a rarely used flue. Tujunga’s long dry season means a fireplace can sit idle for months, and creosote left in the flue through that stretch turns tarry and hard. Sudden cold snaps then bring heavy first-fire use, and a flue that was already loaded blocks up with soot and the occasional bird nest.
DuraFlex Parts & Our Repair-vs-Replace Approach
When a DuraFlex top plate, cap, connector or section of liner needs replacing, matching the original DuraFlex component or a specification-equivalent quality part is what preserves fit and draft. Generic hardware off a shelf often doesn’t seal the same way, and a poor seal is how water gets back into a liner you just paid to fix. We source quality parts that fit DuraFlex equipment. We don’t claim to stock genuine DuraFlex components, and we’ll say so plainly if a part is a spec-equivalent rather than the original.
The repair-or-replace call comes down to condition, not sales targets. A separated wrap near the top, a failed top plate, or a loose connector is a component fix on an otherwise sound liner. Fatigue cracking at an offset, crushing along the run, or widespread rust pitting on the smooth wall points to a liner that’s reached replacement age. You get the camera evidence either way, and you get the honest version, including when the existing DuraFlex is still sound and a full reline would be money spent for nothing. Call (844) 968-2733 for a free estimate.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 inspection and a camera run of the full liner, top to appliance. We check the wrap, the top plate seal, the connector, and every offset, then document what we find with photos you keep.
- 2
Creosote removal. We sweep the flue with methods suited to a stainless smooth wall, so the brush work clears the deposit without scuffing the liner surface. Deposits trapped at a crushed offset get worked until they’re gone, not skipped.
- 3
Repair or install. Component work or a section replacement is matched to the existing DuraFlex specification. Where a multi-flue cap is involved, a fitted cap goes on so the flue is closed against rain, debris and ember intrusion.
- 4
Test. We check draft and confirm the seal at the top plate and the appliance connector before we call the job done. A smoke smell in the room after service means something wasn’t sealed, and we’d rather find that ourselves.
- 5
Warranty and records. You leave with the inspection photos and a written record of what was serviced, which is what a manufacturer warranty claim or a future buyer’s chimney question needs.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Tujunga
DuraFlex makes stainless flexible relining systems, and the range of that work is what we cover. That includes smooth-wall stainless relining kits, flexible stainless liner with insulation wrap, direct-vent and gas insert liner kits, and ovalized liner for tight masonry flues. Ovalizing matters in Tujunga’s mid-century ranch and cabin homes, where original clay tile flues are often too narrow for a round liner without opening the chimney. We service and install across all of it, and we don’t claim to stock any of it. What we do is inspect the existing system, match components to its specification, and tell you when what’s there is still serviceable.
We Also Service These Brands
DuraFlex is one part of the work, not the whole of it. We also handle HeatShield liner resurfacing and repair, and Gelco chimney caps, alongside Olympia Chimney, Famco and Copperfield components. That spread matters because the right answer for a given flue isn’t always the same brand, and an independent shop can recommend based on what the liner needs rather than what a single manufacturer sells.
FAQs – DuraFlex Chimney Cleaning Service in Tujunga
No. We are an independent DuraFlex service provider and we’re not affiliated with or authorized by DuraFlex. We repair, install and service DuraFlex equipment using quality parts that fit it, and we base every recommendation on the condition of your liner rather than on loyalty to any manufacturer. That independence is why we can tell you when a sound DuraFlex run doesn’t need replacing.
Yes, it does. A stainless smooth wall calls for brush methods that clear creosote without scuffing the liner surface, and the inspection has to cover the wrap, the top plate seal and the connector, not just the flue interior. A shop that sweeps a flexible liner the same way it sweeps clay tile can miss a separated wrap or a crushed offset entirely. Call (844) 968-2733 to book a sweep built around your liner.
You usually can’t tell from the firebox, and that’s the honest answer. Smoke smell in the room, creosote flakes in the firebox, or water staining at the top of the flue all point to a problem, but the cause could be a separated insulation wrap, a compromised top plate, or a crushed offset in the flexible run, with creosote buildup following any of them. A Level 2 inspection with a camera traces which one it is. We sweep the flue, inspect the liner end to end, and either correct the seal and wrap or advise on replacing the affected section, matched to the existing liner specification. Call (844) 968-2733 for an exact quote, estimates are free.
Most DuraFlex sweeps and inspections are done in a single visit, and the timing depends on access to the flue, how much creosote has built up, and whether the liner run has an offset that needs careful brush work. If the inspection turns up a component that needs replacing, we set a clear follow-up scope rather than handing the job off. Call (844) 968-2733 and we’ll give you a realistic window for your chimney.
We cover the stainless flexible relining systems: smooth-wall stainless relining kits, flexible stainless liner with insulation wrap, direct-vent and gas insert liner kits, and ovalized liner for tight masonry flues. If you’re not sure which of these is in your chimney, the inspection identifies it. Call (844) 968-2733 to schedule.
Proper service shouldn’t void a liner warranty, and we work to keep it that way. We document liner condition with photos before and after, we don’t alter a sound liner to sell a reline, and we don’t apply anything to the flue interior that a manufacturer’s care instructions wouldn’t allow. Keep the written record we leave with you. Call (844) 968-2733 for a free estimate.
It can, yes. A multi-flue cap covers every flue in the stack, and the unused openings are exactly where water, leaves and ember-borne debris get in. After a wind-driven brush fire or a red-flag warning, we routinely find chimneys packed with wind-blown ash and debris, which is why a fitted cap is standard on a sweep here. Call (844) 968-2733 and we’ll look at the cap alongside the flue you actually burn in.
Waterproofing applied to the masonry exterior is safe for a DuraFlex liner when it’s done correctly, because the liner itself is stainless and the treatment goes on the brick or stone outside it. What matters is that the product is vapor-permeable and that nothing is applied inside the flue, and that a failed top plate seal gets fixed before anyone waterproofs around it. Call (844) 968-2733 to have both looked at together.
Once a year is the baseline for a flue you burn in regularly, and more often if the fireplace is your backup heat through the cold snaps. Tujunga’s long dry season works against you here: creosote sitting in a rarely used flue through the summer turns tarry and hard, and heavy first-fire use then loads it further. The brush tells you more than the calendar does. Call (844) 968-2733 to book a sweep before the burning season.
The price is set per job by a written estimate, so we won’t quote a number before we’ve seen the flue. What drives it is access, creosote volume, and whether the inspection turns up a component that needs replacing. The estimate is free, and you get the camera findings before any work is agreed. Call (844) 968-2733 for an exact quote, estimates are free.
Book Your DuraFlex Service in Tujunga, CA
Whether you need a sweep before the burning season, a Level 2 inspection after a red-flag warning, or a straight answer on whether your DuraFlex liner needs a component fix or a reline, we’ll look at the flue and tell you what the camera shows. Call (844) 968-2733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.