Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Sunland
If your fireplace has been pushing smoke into the room instead of up the flue, the problem is almost always in the stack, not the fire. We handle chimney sweep work across Sunland, from canyon-edge cabins with original masonry flues to valley-floor ranches with clay-tile liners that have never been properly inspected. We know this town’s housing stock, and we know that a sweep here means hand-scraping as often as it means running a brush. Call (844) 968-2733. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.

Why Sunland Homeowners Call Chimney Sweep Tujunga for Chimney Sweep
We’re a full-system chimney specialist, not a cleaning crew that hands off the moment something looks wrong. Inspection findings get acted on during the same visit or in a clear follow-up scope, so you’re not left chasing a second contractor after the sweep. That matters in a town where so many flues are older than the appliances venting into them.
Our technicians have up to 9 years of experience, and that experience shows up in what they won’t do: they won’t run a rotary brush sized for a modern liner through a 1940s unlined flue. They won’t quote a liner without showing you the camera footage first. And they won’t tell you work can wait if it can’t, or tell you it’s urgent if it isn’t.
When we’re in a Sunland home, the pitch is straightforward. We inspect, we show you what we found on camera, and we explain what it means for draft, for safety, and for the structural integrity of the stack. Nothing gets recommended without evidence you can see yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Sunland
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the system: the firebox, damper, smoke chamber, and the visible portion of the flue. For a Sunland ranch home on the valley floor that burns regularly and has no known issues, this is often the right starting point. We check draft, look for creosote accumulation, and note any spalling mortar or cracked tiles visible from the access points.
Level 2 Inspection
A Level 2 inspection goes further. We run a camera through the flue so you can see the actual condition of the liner, the smoke chamber, and the chimney interior. In Sunland’s canyon-edge pockets, where unlined flues and original clay-tile systems are common, this is the inspection that tells you whether the stack is safe to use. It’s also the inspection that prevents unnecessary upsells, because you see exactly what we see.
Creosote Removal
Creosote is the residue that builds up on flue walls as smoke cools on its way out. In Sunland’s mild winters, fireplaces sit idle for months at a stretch, and that’s when creosote hardens into a glaze that a standard brush won’t touch. We remove it by hand in the flues that need it, and we check spark arrestor integrity at the same time, because a glazed flue and a compromised arrestor together are a genuine fire concern during the Santa Ana season.
Soot Removal
Soot is the softer, powdery deposit that sits on top of creosote and coats the smoke chamber and damper shelf. We remove it with careful containment so nothing drifts into the living space. In homes off Apperson and Mt. Gleason, we routinely find soot packed against chimney caps and debris from the previous fire season sitting on top of the smoke chamber. That gets cleared before any inspection findings are finalized.
Trusted Brands We Service in Sunland
When a repair is needed, we source components from brands with genuine standing in the chimney and hearth trades: DuraFlex, HeatShield, Olympia Chimney, and Gelco. HeatShield capability means liner resurfacing is on the table for flues that don’t need full replacement, which is a different answer than a straight tear-out and reline. We don’t stock parts locally or carry inventory on a truck. Components are ordered to the scope and installed when the job is scheduled. What that means for you is a fitted, professional-grade result rather than a generic hardware-store cap screwed over a cracked crown.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Sunland Homes
The dry Santa Ana winds that funnel through Big Tujunga Canyon each fall change what chimney work looks like here. It’s as much about wildfire defense as it is about a comfortable fire on a cold evening. These are the failures we find most often.
- Clay-tile and unlined flues damaged by aggressive brushing. Many 1940s-’50s Sunland homes were built with narrow, unlined flues or clay-tile liners that a rotary brush sized for a modern stainless liner will crack and loosen. These need hand-scraping, and once a tile is cracked, it’s a repair, not a cleaning.
- Original stacks with no chimney cap. A large share of canyon-edge cabins were built without caps at all, so soot, debris, and the occasional bird nest pack the flue over the idle months. A quick pass leaves nesting material and hardened creosote behind, so we fabricate a custom cap on site rather than selling one off a shelf.
- Cracked mortar crowns and failed flashing. Seismic settling cracks older crowns, and the damage stays hidden until the rainy season, when water tracks down the flue and shows up as interior staining or a rusted damper. Crown and cap work is part of the same visit when we find it.
- Oversized appliances vented into undersized flues. A modern insert or stove tied into a stack never designed for it will draft poorly and deposit creosote faster. The fix isn’t always a new liner; sometimes it’s a camera inspection that tells you what the flue was actually built to handle.
Pricing for Chimney Sweep in Sunland, CA
A typical annual sweep and Level 1 inspection in Sunland runs $150 – $275, depending on flue condition and access. A Level 2 inspection with camera runs $225 – $400. Creosote removal on a heavily glazed flue runs $300 – $600, and hand-scraping an unlined canyon-cabin flue sits at the upper end because of the labor involved. A chimney cap, fabricated and fitted, runs $250 – $550 depending on the crown condition. If a crown repair is needed alongside it, that’s quoted separately once we’ve seen it. The written estimate sets the final price, and estimates are free. Call (844) 968-2733 for an exact quote.
We Also Serve Cities Near Sunland
We work throughout the foothills and the valley floor around Sunland, including Tujunga, Sun Valley, La Crescenta-Montrose, and Burbank. If you’re just over the city line and want the same approach to older flues, that’s fine. The work doesn’t change much from one side of the canyon to the other.
Serving Sunland, CA – Our Local Coverage Area
We serve Sunland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Sunland
A standard rotary sweep can damage it, which is why we don’t use one on an unlined or clay-tile 1940s flue. These stacks get hand-scraped with tools matched to the flue, and we run a camera before and after so you can see the condition for yourself. Nothing gets recommended without that footage. Call (844) 968-2733 for an exact quote – estimates are free.
Smoke rolling back into the room during a Santa Ana event is almost always a draft problem, and in Sunland it’s usually traced to a flue packed with soot, a hardened creosote layer, or a nest sitting on top of the smoke chamber. Wind pressure at the canyon mouth compounds it. A camera inspection shows which of those it is before anything gets recommended. Call (844) 968-2733 to book one – estimates are free.
You can’t tell from the firebox, and neither can we until we get a camera and a scraper into the flue. First-degree creosote is a light, flaky deposit that brushes off easily. Third-degree is a hardened glaze that needs chemical treatment and hand-scraping, and it’s the stage that matters for fire risk. In Sunland, mild winters let creosote sit long enough to reach that hardened stage. Call (844) 968-2733 for an exact quote – estimates are free.
Yes, and the mild winters are the reason. Fireplaces sitting idle for months are when creosote hardens and birds nest in uncapped flues, so low use doesn’t mean low risk. A Level 1 inspection is often enough for a valley-floor ranch home. Canyon-edge cabins with original stacks usually need a Level 2 with camera. Call (844) 968-2733 for an exact quote – estimates are free.
No. We’re closed on Saturday. We answer 24/7, and dispatch runs Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 968-2733 for an exact quote – estimates are free.
If your chimney hasn’t been looked at since the last burning season, the inspection is the place to start. Call (844) 968-2733 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tujunga.